Electro-Voice ND6x-8 プリント
General Description (Cont’):
U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: 800/955-6831
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other International locations. For customer orders, contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 887-9212
For warranty repair or service information, contact the Service Repair department at:
800/685-2606
For technical assistance, contact Technical Support at: 866/78AUDIO
Specifications subject to change without notice.
12000 Portland Avenue South, Burnsville, MN 55337
Phone: 952/884-4051, Fax: 952/884-0043
Phone: 952/884-4051, Fax: 952/884-0043
www.electrovoice.com
© Telex Communications, Inc. 2/2002
Part Number 38110-092 Rev. A
Part Number 38110-092 Rev. A
Dimension Drawings:
Frequency Response (On a Tube):
Frequency Response (On an HP4020 Horn):
ND6x-8 Part Number: 301251-102
ND6x-16 Part Number: 301252-102
ND6x-16 Part Number: 301252-102
Top View
Side View
Bottom View
Pure aluminum rectangular voice coil wire is used to obtain
the highest sensitivity. Proprietary bonding and winding
technologies assure unsurpassed reliability.
the highest sensitivity. Proprietary bonding and winding
technologies assure unsurpassed reliability.
Electro-Voice’s commitment to precision compression driver
manufacturing and modern design techniques assure the
ND6x user the highest level of audio and engineering
excellence.
manufacturing and modern design techniques assure the
ND6x user the highest level of audio and engineering
excellence.
Dimension Drawings (Cont’):
Accessories:
• ADH-6 Adapter (For 2” Exit) 591183-102
(must be purchased separately)
Side View
(Shown with
Optional ADH-6
Adapter)
(Shown with
Optional ADH-6
Adapter)
Note: Frequency response and impedance of the ND6x-16 driver attatched to a
38mm (1.5”) diameter plane wave tube, using one watt input (4 Vrms).
38mm (1.5”) diameter plane wave tube, using one watt input (4 Vrms).
Note: Frequency response and impedance of the ND6x-16 driver attached to an
HP4020 Horn, measured on axis in the far field using one watt input (4 Vrms). SPL
calculated to 1 meter equivalent by inverse square law.
HP4020 Horn, measured on axis in the far field using one watt input (4 Vrms). SPL
calculated to 1 meter equivalent by inverse square law.