Velodyne Acoustics HGS-15X プリント

ページ / 2
Dual Tandem Voice Coil - Linear Motion
 
 
 
 
 
 
 
 
 
Specifications 
HGS-10X 
HGS-12X 
HGS-15X 
Amplifier - Class D 
1250 watts RMS/ 
3000 watts peak  
1250 watts RMS/ 
3000 watts peak  
1250 watts RMS/ 
3000 watts peak  
Woofer 
10" forward firing 
(8" piston diameter)  
12" forward firing 
(9.7" piston diameter)  
15" forward firing 
(12.7" piston diameter)  
Voice Coil 
3" Dual Tandem push-pull  
3" Dual Tandem push-pull  
3" Dual Tandem push-pull  
Excursion 
2" maximum  
2" maximum  
2" maximum  
Magnet Structure 
310 oz (19.3 lbs.)  
310 oz (19.3 lbs.)  
380 oz (24 lbs.)  
Cone 
Kevlar reinforced  
Kevlar reinforced  
Kevlar reinforced  
High Pass Crossover 
passive 80 Hz (6dB/octave)  
passive 80  
(6 dB/octave)  
passive 80/100 Hz  
(6 dB/octave)  
Low Pass Crossover 
40 Hz-120 Hz 
(12 dB/octave initial, 
48 dB/octave ultimate)  
40 Hz-120 Hz 
(12 dB/octave initial, 
48 dB/octave ultimate)  
40 Hz-120 Hz 
(12 dB/octave initial, 
48 dB/octave ultimate)  
Crossover By-pass 
Yes - Subwoofer Direct  
Yes - Subwoofer Direct  
Yes - Subwoofer Direct  
Anti-Clipping Circuit 
Yes  
Yes  
Yes  
Inputs and Outputs 
Line Level  
Line Level  
Line and Speaker Level  
Frequency Response 
20-120 Hz +/- 3 dB  
20-120 Hz +/- 3 dB  
18-120 Hz +/- 3 dB  
Subsonic Filter 
20 Hz or 35 Hz  
20 Hz or 35 Hz  
15 Hz or 35 Hz  
Phase 
0° or 180°  
0° or 180°  
0° or 180°  
Auto On/Off 
Yes  
Yes  
Yes  
High Gain Servo 
Yes  
Yes  
Yes  
Distortion 
Less than 1%  
Less than 1%  
Less than .5%  
Remote Control 
Optional  
Optional  
Optional  
Weight 
45 lbs. (20 kg) 
60 lbs. (27 kg) 
95 lbs. (43 kg) 
Cabinet: (H/W/D) 
              (cm) 
(includes grill & feet) 
11½" x 11" x 11"  
28.75 x 27.5 x 27.5 
14¾" x 14" x 15¾" 
 
37 x 35 x 39 
19 7/8" x 18" x 17 7/8  
49 x 45 x 45 
 
 
Velodyne Acoustics, Inc.   
345 Digital Drive      
Morgan Hill, CA 95037   
(408) 465-2800 
www.velodyne.com 
 
 
 
 
 
 
 
 
 
Copyright ©2004 Velodyne Acoustics, Inc. 
Specifications subject to change without notice.  
Other trademarks or registered trademarks are 
property of their respective owners. 
April 2004, Rev A
 
Non-linear cone movement causes a high level of mechanical distortion and 
sloppy, muddy bass performance.  Velodyne conquers this common cause of 
distortion with its unique Dual Tandem Voice Coil design. This system creates 
a linear excursion of 1¼” peak-to-peak with a 2” maximum. A two section 
magnetic structure in a push-pull configuration with a two segment voice coil 
wound out of phase generates less than half the distortion of conventional  
motor designs, and is capable of four times the heat dissipation, contributing  
to Velodyne’s distinctive tight, accurate, low distortion sound.