Vienna Acoustics SCHNBERG ユーザーズマニュアル
To attach the speaker to the wall-mounting
device:
ATTENTION:
As both WEBERN or BERG are symmetrical in
driver orientation (having not top or bottom)
selecting an orientation position for the speakers
so that the tweeters face in or out, as well as up
or down, can be done to suit the nature of each
installation. It is recommended that
experimentation take place to determine which
orientation of the tweeters results in optimal
performance.
1. Please put on the enclosed gloves to avoid
fingerprints.
2. Insert the lower conical tipped bolt inside the
wall-mounting bracket completely with the hexa-
gonal tool (Allen wrench/key). [For center posi-
tioning simply start with whichever side is most
convenient.]
ATTENTION:
The accessories box includes two plastic sockets,
which you can put on the conical point of the
bolts to avoid scratching the inlays. Once the
preferred position is found, they can be
removed.
3. After you have chosen a position, place the
speaker in away that the lower bolt fits into the
chosen conically milled point on the cabinet inlay.
4. Press the speaker against the rubber-pad
and
device:
ATTENTION:
As both WEBERN or BERG are symmetrical in
driver orientation (having not top or bottom)
selecting an orientation position for the speakers
so that the tweeters face in or out, as well as up
or down, can be done to suit the nature of each
installation. It is recommended that
experimentation take place to determine which
orientation of the tweeters results in optimal
performance.
1. Please put on the enclosed gloves to avoid
fingerprints.
2. Insert the lower conical tipped bolt inside the
wall-mounting bracket completely with the hexa-
gonal tool (Allen wrench/key). [For center posi-
tioning simply start with whichever side is most
convenient.]
ATTENTION:
The accessories box includes two plastic sockets,
which you can put on the conical point of the
bolts to avoid scratching the inlays. Once the
preferred position is found, they can be
removed.
3. After you have chosen a position, place the
speaker in away that the lower bolt fits into the
chosen conically milled point on the cabinet inlay.
4. Press the speaker against the rubber-pad
and