Alliance Laundry Systems 9001889R7 ユーザーズマニュアル

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

9001889

28

The _x__PV should reflect the size selected in earlier 

steps. 
Turn key to Program Mode.

Press “Auxiliary”, “3”, “1”. 

The total hours the machine was running will be 

displayed.
Press “Advance” and screen will show total cycles.
Press “Advance” to calibrate the water level sensor.
If the value is not zero, press “Enter” and the value 

will change to zero.

Press “Advance” to calibrate the motor.
The board will lock the door and let the motor spin at 

approximately 500 rpm (Firmware version 1.12 or 

higher). The rpm will increase on the display. If the 

machine reached approximately 500 rpm, the display 

will show a reference value.
After the reference value is shown, the machine will 

coast down to stop. When the machine stands still, the 

board will unlock the door.