Sony MHC-GR10AV ユーザーズマニュアル
18
n
To listen to non-preset radio
stations
stations
Press TUNING MODE repeatedly so that
“MANUAL” appears in step 2, then tune in
the station by turning the jog dial.
“MANUAL” appears in step 2, then tune in
the station by turning the jog dial.
Tips
• Pressing TUNER/BAND when the power is off
automatically turns the power on and tunes to the
last received station (One Touch Play).
last received station (One Touch Play).
• You can switch from another source to the radio
just by pressing TUNER/BAND (Automatic
Source Selection).
Source Selection).
• When an FM program is noisy, press
STEREO/MONO so that “MONO” appears in the
display. There will be no stereo effect, but the
reception will improve. Press the button again to
restore the stereo effect.
display. There will be no stereo effect, but the
reception will improve. Press the button again to
restore the stereo effect.
• To improve broadcast reception, reorient the
supplied antennas.
n
Turn counter-
clockwise
(or pres s
clockwise
(or pres s
=
on the remote)
for lower preset
numbers.
for lower preset
numbers.
Turn clockwise
(or press
(or press
+
on the remote)
for higher
preset numbers.
for higher
preset numbers.
+
–
TUNED
STEREO
STEREO
MHz
VOLUME
PRESET
Preset number
Frequency
Listening to the radio (continued)
1
Press TUNER/BAND repeatedly
until the band you want appears in
the display.
until the band you want appears in
the display.
Every time you press the button, the
band changes as follows:
North and South American, Australian
and Thai models:
F M
band changes as follows:
North and South American, Australian
and Thai models:
F M
˜
A M
Other models:
FM
FM
n
MW
n
SW
2
Press TUNING MODE repeatedly
so that “PRESET” appears in the
display.
so that “PRESET” appears in the
display.
MANUAL
n
AUTO
n
PRESET
3
Turn the jog dial (or press
=
or
+
on the remote) to tune in the
desired preset station.
To
Do this
Turn off the radio
Press POWER.
Adjust the volume
Turn VOLUME (or press
VOLUME +/– on the
remote).
VOLUME +/– on the
remote).