Sony 3-287-077-14(2) マニュアル

Creating your own
sound effect

You can raise or lower the levels of
specific frequency ranges or select the
surround effect, and then store the setting
as “USER EQ” in the memory.
Use the buttons on the unit for this
operation.

Press PRESET EQ or GROOVE
repeatedly to select the audio
emphasis you want for your
basic sound.

Press EQ BAND repeatedly to
select a frequency band or
surround effect setting, and then
turn OPERATION DIAL to adjust
the equalizer level or select the
surround effect you want.
Repeat this for each band you
want to adjust.

Press ENTER.
“USER EQ” appears and the setting is
stored in the memory.

To call up the personal sound effect

Press PRESET EQ repeatedly until
“USER EQ” appears.

To cancel the sound effect

Press PRESET EQ repeatedly until
“FLAT” appears.

Enjoying karaoke

You can sing along by connecting an
optional microphone.

Turn MIC LEVEL on the unit to
MIN to turn down the
microphone volume level.

Connect an optional microphone
to the MIC jack on the unit.

Start playing the music.

Turn MIC LEVEL on the unit to
adjust the microphone volume.
If acoustic feedback (howling) occurs,
reduce the volume, move the
microphone away from the speakers,
or change the direction of the
microphone.
After you have finished, disconnect the
microphone from the MIC jack on the
unit.

GROOVE

AUTO

TUNED

MHz

REC

Frequency band

Equalizer level