ICOM IC-M501EURO ユーザーズマニュアル

iii

carefully and completely

before using the transceiver.

SAVE THIS INSTRUCTION MANUAL —

This in-

struction manual contains important operating instructions for
the IC-M501EURO.

RWARNING! NEVER 

connect the transceiver to an AC

outlet. This may pose a fire hazard or result in an electric
shock.

connect the transceiver to a power source of more

than 16 V DC or using reverse polarity. This will ruin the trans-
ceiver.

cut the DC power cable between the DC plug and

fuse holder. If an incorrect connection is made after cutting,
the transceiver may be damaged.

place the transceiver where normal operation of the

vehicle may be hindered or where it could cause bodily injury.

the transceiver at least 3.3 ft (1 m) away from the

ship’s navigation compass.

use or place the transceiver in areas with temper-

atures below –4°F (–20°C) or above +140°F (+60°C) or, in
areas subject to direct sunlight, such as the dashboard.

the use of chemical agents such as benzine or al-

cohol when cleaning, as they may damage the transceiver
surfaces.

The transceiver rear panel will become

hot when operating continuously for long periods.

Place the transceiver in a secure place to avoid inadvertent
use by children.

After exposure to water including fresh water, clean the trans-
ceiver thoroughly with fresh water to avoid corrosion.

CAUTIONS

IMPORTANT

0 IC-M501EURO_3.qxd  03.7.29 15:26  Page d