Kenwood XD-855E ユーザーズマニュアル
36
EN
USING EXTERNAL UNITS
Video/Auxiliary (Audio signal) input
To listen to or record signals from external sources
through this unit :
through this unit :
1
Use a separately available RCA cord to connect
the desired external unit to the VIDEO/AUX
sockets.
(red = right channel, white = left channel)
the desired external unit to the VIDEO/AUX
sockets.
(red = right channel, white = left channel)
•
When using video equipment (Laser Disc player
or VCR), be sure to connect the audio output to
this unit and the video output to a television.
or VCR), be sure to connect the audio output to
this unit and the video output to a television.
2
Press the ON/STANDBY button to turn the
power on.
power on.
3
Press the VIDEO/AUX button.
4
Operate the external unit.
5
To record the sound from the external unit, per-
form steps
2
-
4
of the “Recording from the
built-in radio” section on page 31.
Note :
•
•
To prevent hum interference, do not place this
unit near a television receiver.
unit near a television receiver.
Headphones
•
Before plugging in or unplugging the head-
phones, make sure the volume level is reduced.
phones, make sure the volume level is reduced.
•
Be sure your headphones have a 3.5mm (1/8”)
diameter plug and are between 16
diameter plug and are between 16
Ω
and 50
Ω
impedance. The recommended impedance is
32
32
Ω
.
•
When headphones are connected, the speak-
ers are disconnected automatically. Adjust the
VOLUME CONTROL for the desired volume.
ers are disconnected automatically. Adjust the
VOLUME CONTROL for the desired volume.
To the line output socket
RCA cord