Kenwood TH-K2ET ユーザーズマニュアル
94
•
The upper limit frequency blinks.
7 Turn the Tuning control to select the upper limit
frequency in MHz.
8 Press [MENU] to store the upper limit frequency or
[PTT] to cancel.
Note:
◆
You cannot program the 100 kHz or lower digits.
◆
The upper limit frequency cannot be set lower than the selected
lower limit frequency.
lower limit frequency.
T
IME
-O
UT
T
IMER
The Time-out Timer limits the time of each transmission.
The built-in Time-out Timer limits each transmission
time to a maximum of 3, 5 or 10 (default) minutes. Just
before the transceiver stops the transmission, a warning
beep sounds. This function is necessary to protect the
transceiver from thermal damage and can therefore not
be turned OFF.
The built-in Time-out Timer limits each transmission
time to a maximum of 3, 5 or 10 (default) minutes. Just
before the transceiver stops the transmission, a warning
beep sounds. This function is necessary to protect the
transceiver from thermal damage and can therefore not
be turned OFF.
1 Press [MENU].
2 Turn the Tuning control to select Menu No. 23
(TOT).
3 Press [MENU].
4 Turn the Tuning control to select “3”, “5” or “10”
4 Turn the Tuning control to select “3”, “5” or “10”
(default) minutes.
5 Press [MENU] to store the setting or [PTT] to cancel.