Kenwood TH-K2ET ユーザーズマニュアル
6
C
HARGING
THE
PB-43N Ni-MH B
ATTERY
P
ACK
(
OTHER
THAN
TH-K2AT K2/ M2, TH-K4AT M2)
The Ni-MH battery pack can be charged after it has
been installed onto the transceiver. (The battery pack is
provided uncharged for safety purposes.)
been installed onto the transceiver. (The battery pack is
provided uncharged for safety purposes.)
1 Confirm that the transceiver power is OFF.
•
While charging the battery pack, leave the transceiver
power OFF.
power OFF.
2 Insert the charger plug into the DC IN jack of the
transceiver.
3 Plug the charger into an AC wall outlet.
•
Charging starts.
4 It takes approximately 12 hours to charge an empty
PB-43N Ni-MH battery pack. After 12 hours, remove
the charger plug from the transceiver DC IN jack.
the charger plug from the transceiver DC IN jack.
5 Unplug the charger from the AC wall outlet.
DC IN jack