Kenwood TH-K2ET ユーザーズマニュアル
80
Adjusting the DTMF Tone Transmission Speed
This transceiver allows you to configure the DTMF
number transmission speed between Fast (default) and
Slow. If a repeater cannot respond to the fast speed,
adjust this parameter.
number transmission speed between Fast (default) and
Slow. If a repeater cannot respond to the fast speed,
adjust this parameter.
1 Press [MENU] to enter Menu Mode.
2 Turn the Tuning control to select Menu No. 33
(SPD).
3 Press [MENU].
4 Turn the Tuning control to select “FA” (Fast) or “SL”
4 Turn the Tuning control to select “FA” (Fast) or “SL”
(Slow).
•
The tone duration of FAST is 50 ms and SLOW is
100 ms. “FA” (Fast) is the default setting.
100 ms. “FA” (Fast) is the default setting.
5 Press [MENU] to store the setting or [PTT] to cancel.
Adjusting the Pause Duration
You can change the pause duration (a space digit)
stored in memory channels. The default setting is
500 miliseconds.
stored in memory channels. The default setting is
500 miliseconds.
1 Press [MENU] to enter Menu Mode.
2 Turn the Tuning control to select Menu No. 35 (PA).
2 Turn the Tuning control to select Menu No. 35 (PA).
3 Press [MENU].
4 Turn the Tuning control to select 100, 250,
4 Turn the Tuning control to select 100, 250,
500 (default), 750, 1000, 1500, 2000 ms.
5 Press [MENU] to store the setting. Otherwise, press
[PTT] to cancel.