JVC RX-DV3RSL ユーザーズマニュアル
63
Operating Other Manufacturers’ Equipment
This remote control supplied with the unit can transmit control signals for other manufacturers’ TVs, STBs, and VCRs.
By changing the transmittable signals from preset ones to other manufacturers’, you can operate other manufacturers’ components using this
remote control.
By changing the transmittable signals from preset ones to other manufacturers’, you can operate other manufacturers’ components using this
remote control.
Changing the Preset Signal Codes
To operate other manufacturers’ equipment using this remote
control
• Aim the remote control directly at the remote sensor on each
control
• Aim the remote control directly at the remote sensor on each
equipment.
• To operate a source with the remote control, the source must be
selected using source selecting buttons on the remote control.
• Refer also to the manuals supplied with your equipment.
7
To change the transmittable signals for
operating other manufacturers’ TV
operating other manufacturers’ TV
1. Press and hold
STANDBY/ON TV.
2. Press TV.
3. Enter the manufacturer’s code
using the number buttons (1–9,
0).
0).
See the right to find the code.
4. Release
STANDBY/ON TV.
You can perform the following operations on the TV:
STANDBY/ON TV
: Turns on or off the TV.
TV VOL + or –
: Adjusts the volume.
TV/VIDEO
: Sets the input mode (either TV or
VIDEO).
After pressing TV, you can perform the following operations on
a TV:
a TV:
TV/STB CH + or – : Changes the channels.
1 – 9, 0, 100+
1 – 9, 0, 100+
: Selects the channels.
For channel number 5, press 5.
For channel number 10, press 1, then 0.
For channel number 23, press 2, then 3.
For channel number 135, press 100+, 3,
then 5.
For channel number 10, press 1, then 0.
For channel number 23, press 2, then 3.
For channel number 135, press 100+, 3,
then 5.
TV RETURN will function as the
ENTER button if your equipment
requires pressing ENTER after selecting
a channel number.
ENTER button if your equipment
requires pressing ENTER after selecting
a channel number.
VCR
STB
TV
AUDIO
STANDBY/ON
Manufacturer
Codes
JVC
00
*
, 02, 13, 14, 47, 74
Akai
01, 02
Blaupunkt
03, 04
Fisher
01, 05
Grundig
03, 06, 07
Hitachi
08 – 10, 49
Iraddio
02
Itt/Nokia
11, 12
Loewe
06, 15, 16
Magnavox
08, 17, 49
Mets
50 – 53
Mitsubishi
08, 18 – 20
Miver
21
Nordmende
22, 23
Okano
15
Panasonic
24 – 27, 76
Philips
15, 17, 28, 75
Quelle
52 – 67
RCA/PROSC
08, 24, 29 – 31, 48
SABA
32, 33, 68 – 70
Samsung
06, 08, 16, 34, 35, 49
Sanyo
01, 05
Schneider
02, 15, 36
Sharp
37, 38, 77
Sony
39
Telefunken
40 – 42, 69
Thomson
71, 72
Toshiba
37, 43, 44
Zenith
45, 46
Manufactures’ codes for TV
VCR
STB
DVD
TV DIRECT
TAPE
TV
CDR
FM/AM
2
3
1
5
6
4
8
9
7
10/
0
+10
100+
EFFECT
TEST
SURR ON/OFF
SURR MODE
– SUBWOOFER +
CENTER
REAR·L
REAR·R
Note:
• Manufacturers’ codes are subject to change without notice. If
they are changed, this remote control cannot operate the
equipment.
equipment.
*“00” is the initial JVC code.
Notes:
• Refer also to the manual supplied with your TV.
• All the functions listed on the left may not be assigned to the
• All the functions listed on the left may not be assigned to the
buttons for some TVs.
• If you cannot change the channels of some TVs by pressing
the number buttons, press TV/STB CH + or – for changing the
channels.
channels.
5. Try to operate your TV by pressing
STANDBY/ON TV.
When your TV turns on or off, you have entered the correct
code.
If there are more than one code listed for your brand of TV,
try each one until the correct one is entered.
code.
If there are more than one code listed for your brand of TV,
try each one until the correct one is entered.
EN61-70RX-DV3SL[B]f.pm5
02.6.6, 2:43 PM
63