JVC UX-L36V ユーザーズマニュアル

– 23 –

You can play back type I, type II, and type IV tapes without
changing any settings.

0 PUSH OPEN on the unit.

0 PUSH OPEN again.

2 3.

The unit automatically turns on and the tape
starts playing. The tape direction indicator
(

3 or 2) flashes slowly on the display.

• Each time you press the button, the tape

direction changes.

3 :

plays the front side.

2 :

plays the reverse side.

When the tape plays to the end, the deck automatically
stops if the reverse mode is set to 

 or 

. (See “To

play both sides—Reverse Mode.”)

“NO TAPE” appears on the display.

To stop playing, press 

7.

To fast-wind to the left or to the right, press 

¢ NEXT or

PREV 

4 while the tape is not running.

The tape direction indicator (

3 or 2) starts flashing quickly

on the display.

To remove the cassette, press 

0 PUSH OPEN on the unit.

You can set the deck to play just one side of a tape, both sides
once, or both sides continuously.

Press REV.MODE.
• Each time you press the button,

reverse mode changes as follows:

 :

The deck automatically
stops after playing both
sides of the tape. Stops
when playback in the 

2

direction is finished.

 :

The deck continues to play both sides of the
tape until 

7 is pressed.

 :

The deck automatically stops after playing one
side of the tape.

The use of the C-120 or thinner tape is not
recommended, since characteristic deterioration
may occur and this tape easily jams in the pinch-
rollers and the capstans.

PUSH

OPEN

0

TAPE

REV.MODE

REV. MODE

On the unit

(only for UX-L36V)

EN15-23_UX-L46&36[US&UJ]f

28/5/2002, 3:59 PM

23