JVC UX-M6VUB ユーザーズマニュアル
English
– 20 –
Using the Timers
There are three timers available — daily timer, recording
timer and sleep timer.
Before using the timers, you need to set the built-in clock.
(See page 8.)
timer and sleep timer.
Before using the timers, you need to set the built-in clock.
(See page 8.)
Using Daily Timer
With the daily timer, you can wake to your favorite music or
radio program.
radio program.
How the daily timer actually works
At the timer-on time, the unit automatically turns on, sets the
volume to the preset level, and starts playing the specified
source (radio or CD). During play, the TIMER “ON”
indicator flashes. Then, at the timer-off time, the unit
automatically turns off (on standby).
The timer setting remains in memory until you change it.
volume to the preset level, and starts playing the specified
source (radio or CD). During play, the TIMER “ON”
indicator flashes. Then, at the timer-off time, the unit
automatically turns off (on standby).
The timer setting remains in memory until you change it.
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step 1
again.
again.
1 Press and hold TIMER ON/
OFF SET (or TIMER on the
remote control) until the
TIMER indicator lights up and
a source name appears on the
display.
remote control) until the
TIMER indicator lights up and
a source name appears on the
display.
• At this point you can view the previous setting by pressing
4 or ¢ repeatedly.
2 Press PROGRAM.
“TUNER,” “TAPE,” “CD” or “REC TU” starts
blinking.
blinking.
3 Press
4 or ¢ to select the
desired source, then press
PROGRAM.
PROGRAM.
If “TUNER” or “REC TU” is selected,
press TUNER to select the current radio
station or press
press TUNER to select the current radio
station or press
4 or ¢ to select a
desired preset radio station, then press
PROGRAM to confirm the selection.
“VOL” appears and the volume level start blinking.
PROGRAM to confirm the selection.
“VOL” appears and the volume level start blinking.
4 Press
4 or ¢ to set the volume, then
press PROGRAM.
The ON indicator and the hour indication start blinking.
5 Press
4 or ¢ to set the timer start hour,
then press PROGRAM.
6 Press
4 or ¢ to set the minute, then
press PROGRAM.
The OFF indicator and the hour indication start blinking.
7 Set the time to stop playback following the
same procedure as steps 5 and 6.
“TIMER OK” appears on the display briefly and the timer
is now set.
is now set.
8 Press TIMER ON/OFF SET (or
TIMER on the remote control) to
activate the timer.
activate the timer.
The TIMER indicator lights up.
9 Turn off the unit (on standby).
When the preset time is reached, the
selected source is played if the timer has
been activated.
selected source is played if the timer has
been activated.
To deactivate the timer, press TIMER ON/OFF SET (or
TIMER on the remote control).
The TIMER indicator disappears.
TIMER on the remote control).
The TIMER indicator disappears.
• The timer-off function is not activated if the starting and
stopping times are the same.
• If the selected source (CD or TAPE) is not available when
the preset time is reached, TUNER is selected
automatically.
automatically.
Timer Recording
You can use the recording timer to record a preset radio
station from a specified time and for a specified duration
automatically.
station from a specified time and for a specified duration
automatically.
1 Load a recordable tape into the tape deck.
• If desired, select the tape reverse mode option.
2 Follow the “Using Daily Timer” procedure on
the left. Select “REC TU” as the source for
timer recording.
timer recording.
• If the preset time is reached while the unit is on, the timer
is not activated for timer recording.
• The recording timer is canceled once the recording is
finished.
TIMER
ON/OFF
SET
PROGRAM
SEARCH/TUNING
PROGRAM
TIMER
ON/OFF
SET
STANDBY
/ON
Continued