JVC UX-QD9S 取り扱いマニュアル

Main unit

Remote control

• The sound input level during recording is automati-

cally adjusted.

• When you record tracks from a disc, a 4-second 

blank is inserted between tracks in the recording. 

You can record tracks with no blank time. 
(

 page 45)

• Do not use long cassette tapes such as C-120 or 

C-150. Long cassette tapes are thin and stretch 
easily, and may become tangled in the inner part 
of the main unit.

• Since this product is not compatible with TYPE II 

and TYPE IV cassette tapes, do not use these 
types of cassette tapes. This product does not 
meet the specifications for these tapes, so sound 
is not properly recorded to these types of cas-
sette tapes. You cannot obtain proper playback 
sound.

• Write protect tags are attached to a cassette 

tape for preventing the erasing of recorded 

sound. They enable you to avoid losing impor-

tant recordings because once you snap off the 

write protect tags, you cannot record to the cas-

sette tape or erase recorded material.

• When you want to use the cassette tape for 

recording again, cover the tag holes with adhe-

sive tape.

• Before inserting the cassette tape, wind the 

tape past the leader part of the cassette 
tape.

• Each time you press 

, the display tog-

gles as follows.

• You can change the reverse mode during 

recording. 

(Continued on next page)

Preventing recorded sound from 

being erased

Write protect 
tag for side A

Write protect 
tag for side B

Magnetic tape 
(recordable part)

Leader tape (unrecordable part)

: For one-way recording on either 

side.

: Pressing  

automatically 

starts one return recording on 
both sides.

: For one return recording on both 

sides.

UX-QD9[US].book  44 ページ  ２００４年１０月８日　金曜日　午前１０時２７分