JVC SP-FSGD7 ユーザーズマニュアル

ページ / 100
 
14
 
English
 
Playing Back from the PC
 
This System is equipped with a USB terminal on the front 
panel. You can connect your PC to this terminal and enjoy 
sound reproduced through your PC. 
When you connect your PC for the first time, follow the 
procedure below.
• Remember you cannot send any signal or data to your PC 
from this System.
 
How to install the USB drivers
 
1
 
Turn on your PC and start running Windows
R
 
 98, 
Windows
R
 
 98SE, Windows
R
 
 Me, Windows
R
 
 2000, or 
Windows
R
 
 XP.
 
• If the PC has been turned on, quit all the applications 
running.
 
2
 
Select USB for the source.
 
3
 
Connect the System to the PC using a USB cable (not 
supplied).
 
 
Use “USB series A plug to B plug” cable when 
connecting
 
.
 
4
 
The USB drivers are installed automatically.
 
To play back sounds on the PC
 
Refer to the manuals supplied with the sound reproduction 
application installed in the PC.
* Microsoft
R
 
, Windows
R
 
 98, Windows
R
 
 98SE, Windows
R
 
 
Me, Windows
R
 
 2000 and Windows
R
 
 XP are registered 
trademarks of Microsoft corporation.
 
Playing Back from Other Equipment
 
To connect other equipment
 
By using an stereo mini plug cord (not supplied), you can 
connect other equipment with analog audio output jacks, 
such as an MD player, a TV, etc.
 
If the audio output on the other equipment is not stereo 
mini plug type,
 
Use a plug adapter to convert the stereo mini plug to the 
corresponding plug of the audio output.
• Refer to the manuals supplied with the other equipment.
 
To select other equipment for the source
 
IMPORTANT
 
• Always set volume to “VOL MIN” when connecting or 
disconnecting the other equipment.
USB cable
PC
(front panel)
 
IMPORTANT
 
• Always set volume to “VOL MIN” when connecting or 
disconnecting the other equipment.
(front panel)
Stereo mini plug cord (not supplied)
Portable audio
device,
Game machine, etc.
FS-GD7[C]_EN.book Page 14 Thursday, March 10, 2005 9:43 AM