JVC TH-M603 ユーザーズマニュアル
Tuner operations
43
Once a station is assigned to a channel number, the station can be
quickly tuned in. You can preset 30 FM and 15 AM stations.
quickly tuned in. You can preset 30 FM and 15 AM stations.
7
To preset the stations
1
Tune in the station you want to preset.
• If you want to store the FM reception mode for an FM
station, select the reception mode you want. See “Selecting
the FM reception mode” below.
the FM reception mode” below.
Example:
When the system is tuned in to 103.5 MHz.
When the system is tuned in to 103.5 MHz.
2
Press MEMORY.
While “CH” and “– –” are flashing:
3
Press number button(s) (1-10, +10) to
select a preset number you want.
select a preset number you want.
• For details on using the number buttons, see “How to use the
number buttons” (
A pg. 25).
Example:
When the preset channel 1 is selected.
When the preset channel 1 is selected.
If the setting is cancelled before you finish, start from step 2
again.
again.
While the selected number is flashing:
4
Press MEMORY.
The selected number stops flashing.
The station is assigned to the selected preset number.
If the setting is cancelled before you finish, start from step 2
again.
The station is assigned to the selected preset number.
If the setting is cancelled before you finish, start from step 2
again.
5
Repeat steps 1 to 4.
• Storing a new station to a used number erases the previously
stored one.
7
To tune in to a preset station
1
Press FM/AM repeatedly to select FM or
AM.
AM.
2
Press number button(s) (1-10, +10) to
select a preset number.
select a preset number.
• For details on using the number buttons, see “How to use the
number buttons” (
A pg. 25).
When the stereo FM program currently tuned in is noisy, you can
change the FM reception mode to improve the reception.
change the FM reception mode to improve the reception.
7 While listening to an FM station
Press FM MODE.
The FM reception mode appears on the display window.
Each time you press the button, the FM reception mode changes.
Each time you press the button, the FM reception mode changes.
• AUTO MUTING:
When a program is broadcast in stereo, you will hear stereo
sound. (The ST indicator lights on the display window.) When in
monaural, you will hear monaural sound. This mode is also
useful to suppress static noise between stations. The AUTO
MUTING indicator lights on the display window.
sound. (The ST indicator lights on the display window.) When in
monaural, you will hear monaural sound. This mode is also
useful to suppress static noise between stations. The AUTO
MUTING indicator lights on the display window.
• MONO:
Reception will be improved although you will lose the stereo
effect. (The ST indicator goes off.) In this mode, you will hear
noise until you are tuned in to a station. (The AUTO MUTING
indicator also goes off.)
effect. (The ST indicator goes off.) In this mode, you will hear
noise until you are tuned in to a station. (The AUTO MUTING
indicator also goes off.)
When listening to an AM broadcast with a lot of noise interference,
you can change the Beat Cut mode to reduce the noise.
you can change the Beat Cut mode to reduce the noise.
7 While listening to an AM station
Press FM MODE.
The current Beat Cut mode appears on the display window.
Each time you press the button, the Beat Cut mode changes.
• Choose “BEAT CUT 1” or “BEAT CUT 2” according to which
Each time you press the button, the Beat Cut mode changes.
• Choose “BEAT CUT 1” or “BEAT CUT 2” according to which
gives clearer sound.
Preset tuning
1 0 3 . 5 M
_ _
1 0 3 . 5 M
1
1 0 3 . 5 M
Selecting the FM
reception mode
reception mode
Reducing the noise of AM
broadcast
broadcast
See page 42 for button locations.