JVC TH-S77 ユーザーズマニュアル

IMPORTANT
Before using the remote control for the following 

operation; 

• Set the remote control mode selector to AUDIO.

NOTE
Before you start operation;

• There is a time limit when doing the following steps. If the setting is 

cancelled before you finish, start from step 1 again.

Example:

Press Cursor Y/5 to select the item 
you want to set.

• DEC (Decode):

When you play an external source (DBS D is selected as a 
source) that was encoded with DOLBY D or DTS Digital 
Surround, the following symptoms may occur;
• No sound comes out at the beginning of playback.
• Noise comes out while searching for or skipping chapters 

or tracks.

A/PCM (Auto/PCM):

Normally select this. The system 
automatically detects the incoming signals.

DD:

Select this if the symptoms above occur 
when playing a disc (or software) encoded 
with DOLBY D.

DTS:

Select this if the symptoms above occur 
when playing a disc (or software) encoded 
with DTS Digital Surround.

• BAL (Balance):

You can adjust the balance between the front left and front 
right speakers.

Press Cursor 3/2 to make an 
adjustment or selection.

Example:

The adjustment is set and the display automatically disappears 
a few seconds later.

• When “DD” or “DTS” is selected, if a signal encoded with another 

digital format comes in, you cannot listen to the sound. (The 
G

DIGITAL or C indicator flashes.)

A

E

D

/

M

C.

C

P

E

D

D D

C.

See page 22 for button locations.

TH-S77[U].book  Page 33  Wednesday, April 27, 2005  2:01 PM