JVC RX-E100SL ユーザーズマニュアル
8
Basic Operations
1
Turn On the Power
Press POWER (or AUDIO of the POWER buttons on the remote
control).
The STANDBY lamp goes off. The name of the
current source (or station frequency) appears on
the display.
control).
The STANDBY lamp goes off. The name of the
current source (or station frequency) appears on
the display.
To turn off the power (into standby)
Press POWER (or AUDIO) again.
The STANDBY lamp lights up.
A small amount of power is consumed in standby
mode. To turn the power off completely, unplug
the AC power cord.
The STANDBY lamp lights up.
A small amount of power is consumed in standby
mode. To turn the power off completely, unplug
the AC power cord.
2
S
elect the Source to Play
Press one of the source selecting buttons.
DVD
: Select the DVD player.
TV
: Select the TV sound.
VCR
: Select the VCR.
CD
: Select the CD player.
FM
: Select an FM broadcast.
AM
: Select an AM broadcast.
VOL
DGTL AUTO
L
R
LPCM
Current volume level is shown here
Current source name appears
STANDBY lamp
Display
DVD
TV
VCR
CD
FM
AM
RX-E100
HOME THEATER RECEIVER
TV DILECT
DVD
MEMORY
CONTROL
ADJUST
SETTING
STANDBY
D I G I T A L
D I G I T A L
S U R R O U N D
INPUT
ANALOG/DIGITAL
INPUT ATT
MASTER VOLUME
SURROUND
ON/OFF
DSP
MODE
ANALOG
PRO LOGIC
SUBWFR LFE
SLEEP
ST
TUNED
MUTING
MH
Z
KH
Z
VOL
AUTO
DGTL AUTO
INPUT ATT
DSP
L
C
R
LS
S
RS
LPCM
DOLBY D
DTS
POWER
1
2
3
This manual mainly explains operations using the buttons and controls on the front panel. You can also use the buttons on the remote
control if they have the similar names (or marks) as those on the front panel.
If operations using the remote control are different from those using the front panel, they are then explained.
• You can also see “Mastering Remote Operations” on page 32.
control if they have the similar names (or marks) as those on the front panel.
If operations using the remote control are different from those using the front panel, they are then explained.
• You can also see “Mastering Remote Operations” on page 32.
STANDBY
POWER
Note:
When you have connected some digital source components using the
digital terminals (see page 6), see “Basic Settings” on pages 10 and
11 to finish the digital input terminal setting and digital input mode
setting correctly before use.
digital terminals (see page 6), see “Basic Settings” on pages 10 and
11 to finish the digital input terminal setting and digital input mode
setting correctly before use.
3
A
djust the Volume
To increase the volume, press and hold
MASTER VOLUME
MASTER VOLUME
(or VOLUME + on the
remote control).
To decrease the volume, press and hold
MASTER VOLUME
To decrease the volume, press and hold
MASTER VOLUME
(or VOLUME – on the
remote control).
CAUTION:
Always set the volume to the minimum before starting any source. If
the volume is set at its high level, the sudden blast of sound energy
can permanently damage your hearing and/or ruin your speakers.
the volume is set at its high level, the sudden blast of sound energy
can permanently damage your hearing and/or ruin your speakers.
Notes:
• The volume level can be adjusted within the range of “0” (minimum)
to “70” (maximum).
• Each time you press the button, the volume level changes by 2
steps from “0” (minimum) to “14” and by 1 step from “14” to “70”
(maximum).
(maximum).
MASTER VOLUME
STANDBY
POWER
DVD
TV
VCR
CD
FM
AM
DVD
EN08-16.RX-E100SL[J]_f
01.3.7, 2:49 PM
8