JVC UX-G500V ユーザーズマニュアル
26
Recording from a Disc
You can record tracks in digital recording from a CD onto
the USB device.
• Do not vibrate the System while recording/editing
the USB device.
• Do not vibrate the System while recording/editing
tracks. Take care especially while “WAIT” is shown on
the display. It may damage the recorded tracks on the
System.
the display. It may damage the recorded tracks on the
System.
Before recording....
Connect a recordable USB device to the USB memory
terminal (
Connect a recordable USB device to the USB memory
terminal (
). (See also page 6.)
1
Start and stop playback of the disc.
2
Select a track to start recording.
Recording starts from the
selected track until the last
track.
selected track until the last
track.
3
Enter recording mode.
4
Select a folder to record tracks into.
• If “NEW GROUP” is selected, the System will
automatically create the new group as “001_group.” If
“001_group” already exist, “002_group,” “003_group,”
and etc will be created.
“001_group” already exist, “002_group,” “003_group,”
and etc will be created.
(on the main unit)
• To give title directly to the new group, press
TITLE/DEL (while holding SHIFT) when the cursor is
pointing at “NEW GROUP.”
pointing at “NEW GROUP.”
• To change title for the existing groups (eg.
“GROUP01,” “GROUP02,” etc.), see “Giving (Editing)
Titles to Tracks or Groups” on the following.
Titles to Tracks or Groups” on the following.
Both recording and playback start at the same time.
When playback ends, recording also stop.
When playback ends, recording also stop.
• You cannot change the source while recording.
• If you have programmed the playing order for CD (see
“Programming the Playing Order—Program Play” on
page 22), the tracks are recorded in the programmed
order if Program Play is activated.
page 22), the tracks are recorded in the programmed
order if Program Play is activated.
To stop recording
manually:
manually:
To record the playing
track (1 track):
track (1 track):
During play or pause...
(on the main unit)
Then, repeat step 4 on the
left column.
left column.
Giving (Editing) Titles to Tracks
or Groups
or Groups
Remote
ONLY
ONLY
While playing, you cannot edit track/group titles.
• To edit the title, stop the playback.
• To quit title editing, press CANCEL (while holding
• To edit the title, stop the playback.
• To quit title editing, press CANCEL (while holding
SHIFT).
You can give titles (up to 24 characters) to the tracks and
groups (up to 28 characters) in the USB device.
groups (up to 28 characters) in the USB device.
1
Start and stop playback of the USB device.
2
Select a track/group you want to edit.
To select a track:
To select a group:
GROUP SELECTION
USE
% TO SELECT GROUP.
TO EXIT, PRESS
7.
PLEASE SELECT GROUP IN WHICH YOU WANT TO RECORD.
THEN PRESS ENTER TO START RECORDING.
NEW GROUP
GROUP01
GROUP02
GROUP03
GROUP04
GROUP02
GROUP03
GROUP04
(while holding...)
EN25-36_UX-G500V[U]1.indd 26
EN25-36_UX-G500V[U]1.indd 26
3/11/08 12:58:14 PM
3/11/08 12:58:14 PM