JVC SP-FSH100 ユーザーズマニュアル
15
4
Press TAPE.
The unit automatically turns on and the
source changes to the tape deck.
• You can select to the tape by pressing
source changes to the tape deck.
• You can select to the tape by pressing
TAPE on the remote control.
5
Press
# (play).
The tape starts playing.
• When the end of the tape is reached,
• When the end of the tape is reached,
playing stops.
To stop playing, press
&/).
To stop playing for a moment, press
*.
To resume playing, press
* again.
To fast forward or rewind the tape, press
⁄
or
!.
• The fast forwarding or rewinding stops at the
end of the tape.
To remove the cassette, press
&/) while
playback is stopped.
• DO NOT turn off the unit while playing back or
recording a tape. The cassette deck or tapes
may be damaged.
may be damaged.
• The use of C-120 or longer tape is not
recommended, since characteristic deterioration
may occur and this tape easily jams in the pinch
rollers and the capstans.
may occur and this tape easily jams in the pinch
rollers and the capstans.
• This unit is not compatible with type II and type
IV tapes.
For tape operations, use buttons on the unit.
Playing Back a Tape
You can play back type I tapes only.
On the unit ONLY:
1
Press
&/) (stop/cassette holder open).
The cassette holder opens.
2
Put a cassette in with the exposed part of the
tape down.
tape down.
3
Close the cassette holder gently.
Playing Back Tapes
TAPE
15-16_FS-H100[J]2.p65
04.1.30, 3:30 PM
15