JVC XL-FZ700BK ユーザーズマニュアル

You can play only the favorite tracks in any desired order.

In stop mode, press the PROGRAM button so 
that the PROGRAM indicator lights on the 
display.

Select the disc which contains the track to be 
programmed with the DISC (1-7) button. “AL” 
(all tracks) appears on the display.

To program the entire disc
When the track number is not specified after 
selecting the disc number, all tracks on the selected 
disc are programmed.

Select the track number by pressing the 
track buttons on the remote control unit.

To select the track number with the track buttons, 
see “How to use the track buttons” on page 9.

• If you want to cancel the displayed program step, 

press the CANCEL button on the remote control 
unit and then enter a new disc number and/or 
track number.

Repeat steps 

 and 

 for other tracks and/or 

discs to be programmed.

You can program up to 32 steps.

Start playback by pressing the 

3 PLAY button 

on the main unit or the 

3 button on the 

remote control unit.

The programmed tracks and/or discs are played in 
the programmed order and, when all the 
programmed tracks/discs are played back, program 
playback stops.
• You can skip to a desired program step with the 

4/¢ buttons.
If you have programmed all discs as “AL”, 
pressing 

¢ (or 4) will skip to the next (or 

previous) disc.

In stop mode or during playback, press the CALL 
button on the remote control unit. Each time the CALL 
button is pressed, the program contents are displayed 
in the programmed order. (After pressing the CALL 
button, perform the next button operation within five 
seconds (during the program step number is 
blinking).)

To add a new program step to the last step, enter the 
new disc number and/or track number referring to 
steps 2 and 3 above. 
To delete the program step from the last step, press 
the CANCEL button on the remote control unit. Each 
time the CANCEL button is pressed, the last program 
step is deleted one by one.
To delete any program step, press the CALL button to 
locate the program step number you want to delete, 
and then press the CANCEL button. (After pressing 
the CALL button, perform the next button operation 
within five seconds (during the program step number 
is blinking).)

To exit program mode, press the PROGRAM button on 
the remote control unit so that the PROGRAM 
indicator goes out on the display. However, the 
program contents are not erased and, whenever the 
program mode is selected, you can play the tracks in 
programmed order.

In stop mode, press the CANCEL button on the remote 
control unit repeatedly until entire program contents 
are deleted. Or, press the 

0 OPEN/CLOSE button on 

the main unit or the OPEN/CLOSE button on the 
remote control unit.
Even after the entire program contents have been 
cleared, the unit remains in program mode. 
Note that turning off the unit does not clear the 
program contents.
If the AC power cord is disconnected from the outlet, 
the program will be erased.

PROGRAM

Remote control unit

Shows that a disc is loaded

PROGRAM indicator

AL (all tracks)

Program step number

ex.) When disc 4 is selected.

2

3

4

1

6

7

8

5

10

+10

9

Remote control unit

Track number selected for the program step 1

Shows the disc being programmed

ex.) When track 5 is selected.

XL-FZ 700BK(UJ).book  Page 11  Friday, April 19, 2002  6:05 PM