JVC UX-G30UW ユーザーズマニュアル

2

2

2

2

 

Make sure that both speakers are connected correctly and 
firmly.

• When connecting the speaker cords, match the polarity of 

the speaker terminals: red cord to (+) and black cord to (–).

• If the speaker cords are covered with vinyl, remove the 

vinyl to expose the tip of the speaker cord by twisting the 
vinyl.

3

3

3

3

 

• By using QP Link (Quick Portable Link), you can easily 

start playing back a portable audio device on this unit. See 
page 10 for details.

• If an external device is not equipped with a stereo mini plug 

audio output, use a plug adapter to convert the stereo mini 
plug to the corresponding plug of the audio output.

 

• Dispose of batteries in the proper manner, according to 

federal, state, and local regulations.

 

Point the top of the remote control toward the remote sensor 
as directly as possible. If you operate it from a diagonal 
position, the operating range (approx. 5 m) may be shorter.

• DO NOT connect more than one speaker to 

each terminal.

• DO NOT allow the conductor of the speaker 

cords to be in touch with the metallic parts of 
the System. 

Use a screwdriver to rotate the voltage 
selector so that the voltage marker is 
pointing to the same voltage as where 
you are plugging in the unit. (See also 
the back cover page.)

DO NOT plug in before setting the voltage 
selector and all connection procedures are 
complete.

1 Hold

2 Insert

3 Release

Red

Red

Black

From left speaker

From right speaker

Voltage 
marker

 

DO NOT recharge, short, disassemble, heat 
the battery or dispose of it in a fire.

DOWN

UP

PHONES

AUX

R03(UM-4)/AAA(24F)

UX-G30[US_UB_UW_A].book Page 5 Tuesday, February 14, 2006 10:27 AM