JVC SP-UXQD9S 取り扱いマニュアル

(Continued)

Connections

You can enjoy pictures of better quality using the 

following cord instead of the supplied video cord.

You can enjoy better quality pictures than when 
using the S-video cord.

• Use one of either the S-video cord or the 

component video cord. If both cords are used, 
pictures may not be played back properly.

• In order to enjoy pictures with the progressive 

mode (

 page 29), the TV is required to have 

progressive video input.

• If the component video input jacks of your TV are 

BNC type, use a plug adapter (not supplied) to 
convert the plugs.

• After making all other necessary connections, 

connect in the power plug. 

• The preset setting such as preset channels and 

sound adjustment may be erased in a few days in 
the following cases:
- When you disconnect the power plug.
- When a power failure occurs.

When you connect the power plug into the AC 
outlet, "DEMO START!" appears in the display 
window and the demonstration display starts. 

When you press 

 on the main unit, "DEMO 

OFF" appears in the display window and the 
demonstration display is canceled. 
Turning on the main unit automatically cancels the 
demonstration display. 

With the power turned off, press 

 on the main 

unit. 

Connect all necessary parts before connecting the power plug.

Connecting by using the S-video cord

TV

Main unit

S-video cord 
(not supplied)

S-VIDEO

Connect the ends of S-video cord making 

sure that each end matches its compatible 

terminal.  

Connecting by using the component 

video cord

TV

Main unit

Component video cord
(not supplied)

AC outlet 

Main unit (rear view) 

Demonstration display function 

With the power turned off, hold down 

 

until "DEMO CLEAR" appears. 
Disconnecting and then reconnecting the 
power plug does not start the demonstration 
display. 
To activate the demonstration display again, 

hold down 

 until "DEMO START!" 

appears. 

UX-QD9[US].book  15 ページ  ２００４年１０月８日　金曜日　午前１０時２７分