JVC TH-C5 ユーザーズマニュアル

IMPORTANT
Before using the remote control for the following 
operation; 
• Set the remote control mode selector to 

AUDIO.

NOTE
Before you start operation;

• There is a time limit when doing the following steps. If the setting is 

cancelled before you finish, start from step 1 again.

Press SETTING.

Example:

Press Cursor Y/5 to select the item 
you want to set.

• DEC (Decode):

When you play an external source (DBS is selected as a 
source) that was encoded with Dolby D or DTS Digital 
Surround, the following symptoms may occur;
• No sound comes out at the beginning of playback.
• Noise comes out while searching for or skipping chapters 

or tracks.

A/PCM (Auto/PCM):

Normally select this. The system automatically 
detects the incoming signals.

DD:

Select this if the symptoms above occur when 
playing a disc (or software) encoded with Dolby 
D.

DTS:

Select this if the symptoms above occur when 
playing a disc (or software) encoded with DTS 
Digital Surround.

• MON (Monitor Out):

Select the video output jack type by which you watch DVD 
playback after connecting your TV. (

A pg. 12)

Set the video output to use AV COMPU LINK remote 
control system. (

A pg. 41)

VIDEO:

To watch DVD playback via the VIDEO jack.

S:

To watch DVD playback via the S-VIDEO jack.

COMP (Component):

To watch DVD playback via the COMPONENT 
VIDEO OUT jacks.

Press Cursor 3/2 to make an 
adjustment or selection.

Example:

The adjustment is set and the display automatically disappears 
a few seconds later.

• When “DD” or “DTS” is selected, if a signal encoded with another 

digital format comes in, you cannot listen to the sound. (The 
GDIGITAL or C indicator flashes.)

A

E

D

/

M

C.

C

P

E

D

D D

C.

See page 24 for button locations.

TH-C3C4C5C6C7[JC].book  Page 35  Wednesday, January 26, 2005  5:29 PM