JVC SP-VSDT9 ユーザーズマニュアル
17
Using the Tuner
To Change the FM Reception
Mode
Mode
(Using the Remote Control)
When you are tuned into an FM stereo broadcast, the
“STEREO” indicator lights up and you can hear stereo ef-
fects.
If an FM stereo broadcast is hard to receive or noisy, you
can select Monaural mode. Reception improves, but you
lose stereo effect.
When you are tuned into an FM stereo broadcast, the
“STEREO” indicator lights up and you can hear stereo ef-
fects.
If an FM stereo broadcast is hard to receive or noisy, you
can select Monaural mode. Reception improves, but you
lose stereo effect.
Press the FM MODE button on the Remote Control
so that the “MONO” indicator lights up on the dis-
play.
so that the “MONO” indicator lights up on the dis-
play.
To restore the stereo effect, press the FM MODE button
on the Remote Control so that the “MONO” indicator goes off.
on the Remote Control so that the “MONO” indicator goes off.
Receiving FM Stations with RDS
(Using the Remote Control)
You can use the RDS (Radio Data System) by using the Re-
mote Control.
RDS allows FM stations to send additional signals with
their regular programme signals. For example, the stations
send their station names, and information about what type
of programmes they broadcast, such as sports or music, etc.
This unit can receive the following types of RDS signals:
You can use the RDS (Radio Data System) by using the Re-
mote Control.
RDS allows FM stations to send additional signals with
their regular programme signals. For example, the stations
send their station names, and information about what type
of programmes they broadcast, such as sports or music, etc.
This unit can receive the following types of RDS signals:
PS (Programme Service):
shows commonly known station names.
shows commonly known station names.
PTY (Programme Type):
shows types of broadcast programmes.
shows types of broadcast programmes.
RT (Radio Text):
shows text messages the station sends.
shows text messages the station sends.
What information can RDS signals provide?
The display shows RDS signal information that the station sends.
The display shows RDS signal information that the station sends.
To show the RDS signals on the display
Press the DISPLAY MODE button while listening
to an FM station.
Each time you press the button, the display changes to show
information in the following order:
to an FM station.
Each time you press the button, the display changes to show
information in the following order:
PS (Programme Service):
While searching, “WAIT PS” appears, then station name is
displayed. “NO PS” appears if no signal is sent.
While searching, “WAIT PS” appears, then station name is
displayed. “NO PS” appears if no signal is sent.
PTY (Programme Type):
While searching, “WAIT PTY” appears, then broadcast
programme type is displayed. “NO PTY” appears if no sig-
nal is sent.
While searching, “WAIT PTY” appears, then broadcast
programme type is displayed. “NO PTY” appears if no sig-
nal is sent.
RT (Radio Text):
While searching, “WAIT RT” appears, then a text message
sent by the station is displayed. “NO RT” appears if no signal
is sent.
While searching, “WAIT RT” appears, then a text message
sent by the station is displayed. “NO RT” appears if no signal
is sent.
Station Frequency:
Station frequency (non-RDS service)
Station frequency (non-RDS service)
• If searching finishes at once, “WAIT PS”, “WAIT PTY” and
“WAIT RT” will not appear on the display.
• If you press the DISPLAY MODE button while listening to
an AM (MW/LW) station, the display only shows station
frequency.
frequency.
• RDS is not available for AM (MW/LW) broadcasts.
MONO
FM MODE
PS
PTY
RT
Frequency
DISPLAY
MODE
VS-DT6-9R(B)_EN.book Page 17 Thursday, January 17, 2002 1:26 PM