JVC HX-Z30 取り扱いマニュアル
24
English
1 CD
-- 1
TAPE
AUX IN
TUNER FM
TUNER AM
SET
/DISPLAY
CLOCK
/TIMER
/TIMER
SET
/DISPLAY
CANCEL
/DEMO
PRESET
T
U
N
IN
G
5
Turn
¢ / 4 to select the source to play,
then press SET/DISPLAY.
“SET” appears for about 1 second.
• As you turn
• As you turn
¢ / 4, the source changes as follows:
TUNER FM: tunes in to a specified preset FM station.
= Go to step 6.
TUNER AM: tunes in to a specified preset AM station.
= Go to step 6.
1 CD-- 1:
plays from a specified track of a specified
disc.
disc.
= Go to step 6.
TAPE:
plays a tape in the cassette deck.
= Go to step 7.
= Go to step 7.
AUX IN:
plays an external source.
= Go to step 7.
6
When selecting “TUNER FM” or “TUNER AM”
Turn
¢ / 4 to select the preset station number, then
press SET/DISPLAY.
The unit enters volume setting mode.
The unit enters volume setting mode.
When selecting “1 CD-- 1”
1) Turn
¢ / 4 to select the disc number, then press
SET/DISPLAY.
“SET” appears for about 1 second.
“SET” appears for about 1 second.
2) Turn
¢ / 4 to set the track number, then press
SET/DISPLAY.
“SET” appears for about 1 second, then the unit enters
volume setting mode.
“SET” appears for about 1 second, then the unit enters
volume setting mode.
7
Turn
¢ / 4 to set the
volume level.
• The volume level changes as follows:
• If you select “VOLUME – –,” the volume is set to the
last level when the unit has been turned off.
8
Press SET/DISPLAY to complete
the Daily Timer setting.
the Daily Timer setting.
The DAILY (Daily Timer) indicator stops flashing and
remains lit. “OK ” appears on the display for about 2
seconds.
The settings you have done are shown on the
display in sequence for your confirmation.
remains lit. “OK ” appears on the display for about 2
seconds.
The settings you have done are shown on the
display in sequence for your confirmation.
9
Press
to turn off the unit
(standby) if you have set the
Daily Timer with the unit turned on.
Daily Timer with the unit turned on.
• If the unit is turned on before the on-time comes
Daily Timer does not work.
• Even if you unplug the AC power cord or if a power failure
occurs
Once you set the timer, the timer setting may remain stored in
memory in a few days. Check whether the timer setting still
remains or not.
Once you set the timer, the timer setting may remain stored in
memory in a few days. Check whether the timer setting still
remains or not.
To turn on or off Daily Timer after it has been set
1
1
Press CLOCK/TIMER repeatedly until
“DAILY” appears on the display.
The DAILY (Daily Timer) indicator starts
flashing on the display and the
“DAILY” appears on the display.
The DAILY (Daily Timer) indicator starts
flashing on the display and the
(Timer)
indicator remains lit.
2
To turn off the Daily Timer, press
CANCEL/DEMO.
The DAILY (Daily Timer) and the
CANCEL/DEMO.
The DAILY (Daily Timer) and the
(Timer)
indicators go off from the display (“DAILY
OFF” appears for a while).
The Daily Timer is canceled, but the setting for the Daily
Timer remains in memory.
OFF” appears for a while).
The Daily Timer is canceled, but the setting for the Daily
Timer remains in memory.
— Or —
To turn on the Daily Timer, press
SET/DISPLAY.
“OK ” appears on the display for about 2
seconds.
The settings you have done are shown on the display in
sequence for your confirmation.
SET/DISPLAY.
“OK ” appears on the display for about 2
seconds.
The settings you have done are shown on the display in
sequence for your confirmation.
STANDBY
Continued
VOLUME 10
VOLUME 15
VOLUME
VOLUME 5
EN21-26.HX-Z10&30[C]f
03.2.14, 9:52 AM
24