JVC LVT0900-008A ユーザーズマニュアル
– 30 –
To stop during play, press
7.
To fast-wind to the left, press
4.
To fast-wind to the right, press
¢.
To remove the cassette, push
) (PUSH OPEN).
DO NOT push
) (PUSH OPEN) during tape play.
To play both sides—Reverse mode
You can set the deck to play just one side or both sides of a
tape once, or both sides continuously.
tape once, or both sides continuously.
Press REV.MODE.
• Each time you press the button, the reverse mode
• Each time you press the button, the reverse mode
changes as follows:
: Plays back only one side (front or reverse).
: Plays back the front and reverse sides once.
: Plays back both front and reverse sides
: Plays back the front and reverse sides once.
: Plays back both front and reverse sides
continuously.
To change the information shown in the main display
On the remote control ONLY:
Each time you press DISP/CHARA, the information in the
main display alternates between the source indication and
the clock indication.
• If an MD is inserted, the MD remaining recording time
main display alternates between the source indication and
the clock indication.
• If an MD is inserted, the MD remaining recording time
(“REC REMAIN”) is shown before the clock indication.
• The use of the C-120 or thinner tape is not
recommended, since characteristic deterioration
may occur and this tape easily jams in the pinch
rollers and the capstans.
may occur and this tape easily jams in the pinch
rollers and the capstans.
• You can also play back type II and type IV tapes,
however, the sound quality (tone) may not be
reproduced properly.
reproduced properly.
Playing Back a Tape
You can play back type I tapes.
1
Push
) (PUSH OPEN).
The cassette holder opens.
2
Put a cassette in with the exposed part of the tape
down.
down.
3
Push
) (PUSH OPEN) gently to close the cassette
holder.
4
Press TAPE
2 3.
The unit automatically turns on and the tape play starts.
• Each time you press the button, the tape direction
• Each time you press the button, the tape direction
changes as follows:
:
Plays the front side (left to right).
:
Plays the reverse side (right to left).
When the tape plays to the end, the deck automatically
stops if the reverse mode is set to
stops if the reverse mode is set to
or
. (See
“To play both sides—Reverse mode” in the right
column.)
column.)
Cassette holder
Cassette holder
) (PUSH OPEN)
Reverse mode
and tape direction
indicators
and tape direction
indicators
Tape direction (left to right)
TAPE indicator
EN29-32UX-Z7MD[A]f
02.7.31, 21:25
30