JVC LVT1990-006C ユーザーズマニュアル

■When the main unit is turned on

• Each time you press [ECO/DIMMER], the setting 

changes to “DIM ON”, “AUTO DIM” or “DIM 
OFF” in the display window. 

• When “AUTO DIM” is selected and no operation 

is performed for approximately 5 minutes, the 
display window automatically becomes darker 
than the normal display window. 

You can reduce the power consumption by turning 

off the display window when the main unit is off.

■When the main unit is turned off

• Each time you press [ECO/DIMMER], the dis-

play changes as follows.

- Selecting the normal display turns on the clock 

display and activates the buttons on the main 
unit.

- Selecting “DISP OFF” turns off the clock dis-

play and activates the buttons on the main 
unit.

- Selecting “ECO ON” turns off the clock display 

and deactivates the buttons on the main unit.

NOTE
• You can use the remote control in any of the 

above cases.

• “ECO” refers to “ecology”.

If no sound is produced for 3 minutes, the main 

unit automatically turns off. 

This function is available when a loaded disc or a 

connected USB device is selected as the source. 

■When a loaded disc or a connected USB  

device is selected as the source

• The “A.STBY” lights up in the display window. 
• Each time you press [AUTO STBY], the setting 

turns on and off. 

When playback of a loaded disc or a connected 
USB device finishes, the auto standby function 
starts a countdown. At this time, the “A.STBY” indi-
cator starts flashing.
When no operation is performed for 3 minutes, the 
main unit automatically turns off.

NOTE
• When you change the source to a radio broad-

cast or device connected to the [AUDIO IN] ter-
minal, this function temporarily deactivates. 

You can lock the disc tray to prevent the disc from 

being ejected.

■When the main unit is turned off 

Press 0 on the main unit while hold-

ing down 7 on the main unit. 

• “LOCKED” appears in the display window. 
• To cancel the disc ejection lock, press 0 on the 

main unit while holding down 7 on the main unit 
again. “UNLOCKED” appears in the display win-
dow.

Activating the auto standby function

Performance of the auto standby 
function

Setting the disc ejection lock 

Main unit (front view)

For the locations of the remote 
control buttons, refer to page 11. 

UX-GN7V[US]EN-04.fm  Page 14  Friday, February 13, 2009  9:54 AM