JVC GVT0277-017B プリント

GVT0277-017B

GVT0277-017B   EN_NX-D2[J] Operating Guide 02

GVT0277-017B   EN_NX-D2[J] Operating Guide 02

GVT0277-017B   EN_NX-D2[J] Operating Guide 02

GVT0277-017B   EN_NX-D2[J] Operating Guide 02

•  When using an 8 cm disc, place it on the inner circle of the 

disc tray. 

To close the disc tray, press 

0 again.

When the System is turned on and the disc tray is closed, 
press 

0 while touching 7 (on the main unit).

To cancel the prohibition, repeat the same procedure. 
“UNLOCKED” appears on the display.

While playing...

 

While playing...

 

•  When you press 

4 for the first time, you go back to the 

beginning of the current track/file. 

While playing...

 

To select a group:
Press a group number using the number buttons.

To select a track/file:
Press a track/file number using the number buttons.

USB cable (not supplied)

The System can store the stop point, and when you start 
playback again by pressing CD 

6 or USB 6 (even 

while on standby), it starts from the position where you 
have stopped—Resume Play.
To stop completely while Resume is activated, press 

7 

twice. 

The operations will vary depending on the discs or files. 

 

Or press number buttons to select the audio track.
You can select the audio channel to listen to.

•  No USB device is connected or the connected USB device 

is not compatible with this System.

•  The unit has failed to read the USB device.

•  Playable format file does not exist in USB device.

Canceled

You can listen to the audio player connected to the AUDIO 
IN jack.

•  Make sure to turn down the volume on the System to 

minimum level before starting playback.

If the sound from the device connected to the AUDIO IN jack 
is too loud or too quiet, you can preset the audio input level 
through the AUDIO IN jack (without changing the volume 
level). 

While “AUDIO IN” is selected as the source... 

 

•  As the number of the level increases, the preset input level 

is increased.

While FM or AM is selected... 

 

Frequency starts changing on the display. When a station 
(frequency) with sufficient signal strength is tuned in, the 
frequency stops changing.
•  When you repeatedly press the button, the frequency 

changes step by step. To manually stop the search, press 
either button.

•  The ST indicator lights while an FM stereo station with 

sufficient signal strength is tuned in.

 

The MONO (monaural) indicator lights on the display. 
Reception will improve though stereo effect is lost—
Monaural reception.
To restore the stereo effect, press the button again. The 
MONO (monaural) indicator disappears.

Stereo mini plug (not supplied)

From audio output
(or headphone out, etc.)

Connect an iPod to dock A or B on the unit. You can have 2 
iPod devices connected at the same time.

•  Make sure the unit is on standby when you connect the 

iPod.

•  When you connect iPod to the dock, make sure the 

terminal on the dock is fully inserted into iPod.

•  After connecting iPod, wait until the unit is ready for 

operation (about 3 seconds).

•  Be careful not to damage the terminal on the dock when 

connecting / disconnecting the iPod.

•  Do not touch or hit the terminals of the dock and of iPod. 

It might cause damage to these terminals.

•  Always set the volume to the minimum level when 

connecting or disconnecting iPod.

•  Do not carry the unit with iPod connected. You might drop 

it down or it might cause damage to the connector part.

•  Remove iPod from the dock when you do not use it.

To detatch the dock adapter from the dock:
Pull up the dock adapter with your fingernail or sharp 
pointed tool using the slot.

•  Be careful not to injure your fingertips or damage the 

terminal of the dock.

About charging the battery of iPod
The unit enables users to charge the battery of iPod.
1 Press 

 to turn on the power of the unit.

2 Select iPod as the source.
3 Press and hold 

7 for 2 seconds to start charging.

•  Press and hold 

7 to deactivate the battery charging 

fuction.

•  When 2 iPod devices are connected, both batteries are 

charged at the same time.

•  For details of the battery charging, see the instruction 

manual for iPod.

•  Before viewing a video/picture from iPod on your 

TV, make the appropriate video setting on iPod. For 
details of the setting, see the instruction manual for 
iPod.

•  For iPod touch
  Operate iPod touch itself in the following cases:
  –when operating the home button
  –when selecting application icons on the home screen
  –when dragging the slider
•  When you cannot operate iPod connected through 

the unit or using the remote control, operate iPod 
itself.

While playing…

 

While playing…

 

Dock adapter (supplied with the iPod or 
sold separately)

Dock A

Dock B

Applies Shuffle Play to iPod A or iPod B selected as the 
source. Select the desired shuffle mode.

 

•  The shuffle icon lights up on the display of iPod devices.
•  To cancel, press again until the shuffle icon disappears.

iPod nano
1GB/2GB/4GB

✓

—

✓

iPod nano (2nd generation)
2GB/4GB/8GB

✓

—

✓

iPod nano (3rd generation)
4GB/8GB

✓

✓

✓

iPod nano (4th Generation)
8GB/16GB

✓

✓

✓

iPod mini
4GB

✓

—

—

iPod mini (2nd Generation)
4GB/6GB

✓

—

—

iPod with color display
20GB/60GB

✓

—

—

iPod (Click Wheel)
20GB/40GB

✓

—

—

iPod classic
80GB/120GB/160GB

✓

✓

✓

iPod photo
30GB/40GB/60GB

✓

✓*

1

—

iPod (5th Generation)
30GB/60GB/80GB

✓

✓

✓

iPod touch
8GB/16GB/32GB

✓

✓

✓

iPod touch (2nd Generation)
8GB/16GB/32GB

✓

✓*

2

✓

*

1 

Only for still picture.

*

2

 To view a video/picture from iPod touch on your TV, update the software to the latest version. (Any additional 

charges may apply.) For details about updating iPod, check on the Apple web site <http://www.apple.com>.

•  Program Play/Random Play cannot be used for USB.
 Ex:

 

To exit Program Play or Random Play, press PROGRAM 
or RANDOM until PRGM, RND are all off before or after 
playback.

PROGRAM—To program the playing order.
•  You can arrange the playing order of the tracks/files (up to 

99) before you start playback.

•  Resume does not work for Program Play.

1  Press PROGRAM button.
2  Select tracks/files you want for Program Play using 

the number buttons.
• For MP3/WMA files:
  Select a group number, then select a track/file 

number.

3 Repeat step 2 until you complete your program.
4 Press 

6 to start playback.

RANDOM—To play all the tracks at random.

Press REPEAT repeatedly to select Repeat Mode.

 

•  Repeat Mode varies depending on the medias or the files.

REPEAT TRK

Repeats the current track/file.

REPEAT ALL

Repeats all the contents of tracks/files.

REPEAT GRP

Repeats the current group.

REPEAT OFF

Canceled.

(PROGRAM mode)

REPEAT STEP

Repeats the current track/file.

REPEAT ALL

Repeats all the programmed tracks/files.

REPEAT OFF

Canceled.

Canceled

You can preset 30 FM and 15 AM stations.
1  Tune in to a station you want to preset.

•  You can also store the monaural reception mode for 

FM preset stations if it has been selected.

2  Press SET to activate the preset number entry 

mode.
•  Finish the following process while the indication on 

the display is flashing.

3  Select a preset number for the station you store 

4   Press SET to store the station.

1  Select the band (FM or AM).
2  Select the preset number using the number 

Press 

 to go back to the standby mode. This memorizes 

the preset station you set.

2 sec.

1  Select DAILY (1 – 3) time setting mode (ON)
2  Set the timer as you like.

Repeat the procedure for the following settings until 
finished.

1  Set the hour then the minute for on-time.
2  Set the hour then the minute for off-time. 
3  Select the playback source—“TUNER AM,” “DISC,” 

“USB,” “iPod A,” “iPod B,” “AUDIO IN” or “TUNER 
FM.”

4  For “TUNER AM” or “TUNER FM”: Select a preset 

channel.

 

For “DISC”: Select the group number, then the track/
file number*.

 

For “USB”: Select the group number, then the track/
file number*.
*  You can select up to 99 groups and 150 tracks/files.

5  Select the volume level (“MIN” to “MAX” and “– –”).
 

If you select “– –,” the volume is set to the same level 
as when the System was last turned off.

Once settings are completed, the timer setting 
information appears in sequence. 

3  Turn off the System (on standby), if you have set 

To cancel the Daily Timer, select DAILY (1 – 3) you want to 
cancel, then press CANCEL.

To turn on the Daily Timer, select DAILY (1 – 3) you want 
to turn on, then press ENTER/SET.

Without setting the built-in clock, you cannot use Daily 
Timer.
1 Press 

•  If you have already adjusted the clock before, press 

the button repeatedly until the clock setting mode is 
selected (see below). 

2  Adjust the hour, then the minute using the cursor 

buttons, press SET.
•  To exit the clock settings, press CLOCK/TIMER as 

required.

•  To return to the previous step, press CANCEL.

Clock setting

Daily Timer
DAILY1

 

= ON (Time)

Canceled

Daily Timer
DAILY2

 

= ON (Time)

Daily Timer
DAILY3

 

= ON (Time)

 (Press and hold)

Press REPEAT to change the repeat playback settings. Press 
once for track repeat, twice for repeat all, and once more to 
cancel. The System displays “REPEAT” only (the icon on the 
iPod display changes).

 
•  Refer to the instruction manual for the iPod for details.

 

 
•  To confirm an item on the menu, press “SET.”

This function enables two iPod devices to play in shuffle 
mode alternately. You can play a variety of songs from both 
iPod devices. When the track of the current iPod source 
finishes, a track from the other iPod source will be played 
automatically and this cycle repeats.
1  Connect iPod to docks A and B on the unit.

•  Compatible iPod models are the same as those 

compatible with Tag information. Refer to “Compatible 
iPod Models” on page 9.

2  With both iPod devices connected, press the 

SHUFFLE button twice. The unit displays “A ← − 
→ B  ON” and will start playing a track.
•  The iPod indicator (refer to “Display Indicators” in 

“Starting up”) on the unit is displayed and the current 
iPod source icon blinks while playing.

3  To stop A B Shuffle, press the SHUFFLE button 

again. The unit displays “A ← − → B  OFF” and will 
stop playing the track.
•  Removing one of the iPod devices from the dock will 

also stop A B Shuffle.

•  If this function does not work correctly, reconnect the iPod 

devices regardless of whether “CONNECTED” is displayed 
on the unit.

 (Press and hold)

Canceled

EN_NX-D2[J].indb   3

10.1.7   4:28:04 PM