JVC FS-X1 ユーザーズマニュアル
20
English
Using External Equipments
Listening to External
Equipment
Equipment
You can listen to the external equipment such as MD re-
corder, tape deck or other auxiliary.
corder, tape deck or other auxiliary.
❑ First make sure that the external equipment is properly
connected to the System. (See page 8).
1
Set the VOLUME control to the mini-
mum position.
mum position.
2
Press the LINE button on the Remote
Control.
Control.
“LINE” will appear on the display.
• You can also select “LINE” using the Source selector
on the Unit.
3
Start playing the external equipment.
4
Adjust the VOLUME control to the
desired listening level.
desired listening level.
5
Apply the following sound effects, if you
wish.
wish.
• AHB PRO (See page 11.)
• Tone (BASS/TREBLE) (See page 12.)
• Tone (BASS/TREBLE) (See page 12.)
To exit the source “LINE”, select other source (e.g.
CD).
CD).
• For operation of the external equipment, refer to its In-
structions.
Changing the Equipment’s Name
You can change the equipment’s name according to the
equipment to be used. (At purchase, “LINE” is selected.)
equipment to be used. (At purchase, “LINE” is selected.)
On the Remote Control
1
Press the LINE button to select the
source “LINE”.
source “LINE”.
2
Press the LINE button for two seconds
or more.
or more.
“NAME CHANGE” blinks on the display.
3
While “NAME CHANGE” is blinking,
press the SET button.
press the SET button.
4
Press the
3
or
2
button repeatedly to
select the desired name.
Each time you press the button, the equipment name
changes as follows.
LINE
changes as follows.
LINE
Ô TAPE Ô DBS Ô VCR Ô TVÔ
GAME
Ô (back to the beginning)
DBS (Direct Broadcasting Satellite): For CS/BS
5
Press the SET button
The current name is replaced with new one.
(When TAPE is selected)
(When TAPE is selected)
• The selected name will appear on the display when you
select the source “LINE”.
Source
selector
selector
SET
2
3
LINE
FS-X1-3(US)_E.book Page 20 Friday, April 18, 2003 7:27 PM