JVC LVT1987-006B ユーザーズマニュアル

•  Do not vibrate the System while recording tracks. It may 

damage the recorded tracks.

•  When you unplug the power cord or if a power failure 

occurs, the timer will be canceled. You need to set the 
clock first, then the timer again.

•  If you set DVD Video as the source, Daily Timer will not 

work correctly.

•  If you set the Sleep Timer after Daily Timer starts playing 

the selected source, Daily Timer is canceled.

•  If the upper and lower parts of the menu are cut off, 

adjust the picture size control of the TV.

•  If you play back a PAL disc/file with the color system set 

to “NTSC” you can watch the playback pictures, but the 
following symptoms may occur:

  – The items on the menu will be blurred, and be shown 

slightly shifted when highlighted.

  – The aspect ratio of the picture may differ from the 

original aspect ratio.

  – The picture movement is not smooth.

•  Even if “4:3 PS / 4:3 MULTI PS” is selected, the screen 

size may become 4:3 letter box while playing a disc/file. 
This depends on how the discs are recorded.

•  When you select “16:9 / 16:9 MULTI” for a picture whose 

aspect ratio is 4:3, the picture changes slightly due to the 
process of converting the picture width.

•  When the language you have selected for “MENU 

LANG,” “AUDIO LANG,” or “SUBTITLE LANG” is 
not recorded, the original language is used as the initial 
language.

To get the best performance of the System, keep your discs 
and mechanism clean.

•  Remove the disc from its case by holding it at the edge 

while pressing the center hole lightly.

•  Do not touch the shiny surface of the disc, or bend the 

disc.

•  Put the disc back in its case after use to prevent warping.
•  Be careful not to scratch the surface of the disc when 

placing it back in its case.

•  Avoid exposure to direct sunlight, extreme temperature, 

and moisture.

Wipe the disc with a soft cloth in a straight line from center 
to edge.

•  Stains should be wiped off with a soft cloth. If the System 

is heavily stained, wipe it with a cloth soaked in water-
diluted neutral detergent and wrung well, then wipe clean 
with a dry cloth.

•  Since the System may deteriorate in quality, become 

damaged or get its paint peeled off, be careful about the 
following:

  – DO NOT wipe it with a hard cloth.
  – DO NOT wipe it forcefully.
  – DO NOT wipe it with thinner or benzine.
  – DO NOT apply any volatile substance such as 

insecticides to it.

  – DO NOT allow any rubber or plastic to remain in 

contact for a long time.

UX-L5V[U]6th.indb   35

UX-L5V[U]6th.indb   35

09.4.2   11:08:44 AM

09.4.2   11:08:44 AM