JVC MX-DK15 ユーザーズマニュアル

 

• Install the System in a location with adequate ventilation to 

prevent internal heat buildup in the System.

• Install in a place which is level, dry and neither too hot nor 

too cold—between 5°C and 35°C.

• Leave sufficient distance between the System and the TV.
• Keep the speakers away from the TV to avoid interference 

with the TV.

 

• When unplugging the System from the wall outlet, always 

pull on the plug, not the AC power cord.

 

Moisture may condense on the lenses inside the System in 
the following cases:
• After starting to heat the room
• In a damp room
• If the System is brought directly from a cold to a warm 

place. 

Should this occur, the System may malfunction. In this case, 
leave the System turned on for a few hours until the moisture 
evaporates, unplug the AC power cord, then plug it in again.

 

• Make sure there is good ventilation around the unit. Poor 

ventilation could overheat and damage the unit.

• A cooling fan is inside the System (except for CA-MXDK1 

and CA-MXDK15) to prevent heat buildup.

 

• Should any metallic object or liquid fall into the System, 

unplug the AC power cord and consult your dealer before 
operating any further.

• If you are not going to operate the System for an extended 

period of time, unplug the AC power cord from the wall 
outlet.

If anything goes wrong, unplug the AC power cord and 
consult your dealer.

 

In addition to the above discs, this System can play back 
audio data recorded on CD Text, and CD-Extra.
• It is possible to play back finalized +R/+RW (DVD Video 

Format only) discs. “DVD” lights on the front display 
panel when a +R/+RW disc is loaded.

• The following discs cannot be played back:

DVD-ROM, DVD-RAM, CD-I (CD-I Ready), CD-G (CD 
Graphics), Photo CD, etc.
Playing back these discs will generate noise and damage 
the speakers.

• For MX-DK3 and MX-DK1/MX-DK15:

This unit cannot play back DVD-VR discs with CPRM 
(Content Protection for Recordable Media).

• In this manual, “file” and “track” are interchangeably used 

for MP3/WMA/MPEG-1/MPEG-2/ASF/DivX/JPEG 
operations.

 

This System accommodates both NTSC and PAL system 
and can play back discs recorded with either system.
To change the color system, see page 6.

 

DVD players and DVDs have their own Region Code 
numbers. This System can play back only DVDs with 
Region Code numbers including “4” for Australia and 
Central and South America, “3” for Southeast Asia, and “2” 
for the Middle East. For your available Region code, check 
the rear panel of your main unit.
EX.: For Southeast Asia

If a DVD with the improper Region Code numbers is loaded, 
“REGION ERR” appears on the display and playback will 
not start.

DO NOT install the System in a location near 
heat sources, or in a place subject to direct 
sunlight, excessive dust or vibration.

DO NOT handle the AC power cord with wet 
hands.

DO NOT block the ventilation openings or 
holes. If they are blocked by a newspaper or 
cloth, etc., the heat may not be able to get out.

DO NOT disassemble the System since there 
are no user serviceable parts inside.

 

DVD Logo is a trademark of DVD Format/Logo Licensing 
Corporation.

• CD-R/-RW/-ROM: Recorded in the Audio CD, Video CD 

and SVCD formats. MP3, WMA, JPEG, MPEG-1, 
MPEG-2, ASF* and DivX* files written in accordance 
with the “ISO 9660” format can also be played.

• DVD-R/-RW: Recorded in the DVD Video format or the 

DVD Video Recording (VR) format. MP3, WMA, JPEG, 
MPEG-1, MPEG-2, ASF* and DivX* files written in the 
UDF format can also be played.

* CA-MXDK5 only

INFO

*

*

*

DIGITAL VIDEO

MX_DK5_3_1.book Page 1 Thursday, February 23, 2006 11:05 AM