JVC GVT0182-005A ユーザーズマニュアル
18
Listening to a Digital Audio Player
Connect a Digital Audio Player to the LINE IN jack
in advance (
in advance (
page 7).
1
Press .
2
Start playing the Digital Audio
Player.
• For details, refer to the instruction manual
for the Digital Audio Player.
3
Adjust the volume of the System
and the Digital Audio Player.
QP Link (Quick Portable Link) automatically
switches the source to LINE as the Digital Audio
Player connected to the LINE IN jack (
switches the source to LINE as the Digital Audio
Player connected to the LINE IN jack (
page 7)
starts playback.
Press .
• Each time you press
, the QP Link setting
changes as follows:
• When the QP Link is activated, the QPLink
indicator lights on the display window.
■ How does the QP Link work?
While the QP Link is activated, starting playback
performs the following:
performs the following:
–
While listening to another source...
Changes the source to LINE automatically.
Changes the source to LINE automatically.
–
While the System is turned off...
Turns on the System and selects LINE as the
source automatically.
Turns on the System and selects LINE as the
source automatically.
NOTE
• When the sound signal from the Digital Audio
Player is too weak, QP Link may not function
correctly. In this case, turn up the volume of the
Digital Audio Player so that the System can detect
the sound signal properly.
correctly. In this case, turn up the volume of the
Digital Audio Player so that the System can detect
the sound signal properly.
• Changing from LINE to another source while QP
Link is working will deactivate QP Link temporarily.
In this case, unplugging the Digital Audio Player
from the LINE IN jack reactivates QP Link.
In this case, unplugging the Digital Audio Player
from the LINE IN jack reactivates QP Link.
• If you press
to turn the System off or if
the timer turns the System off while QP Link is
working, the System will deactivate QP Link
temporarily. In this case, the following reactivates
QP Link:
– When the sound signal from the LINE IN jack
working, the System will deactivate QP Link
temporarily. In this case, the following reactivates
QP Link:
– When the sound signal from the LINE IN jack
stops or is too weak for about 30 seconds after
the System is turned off.
the System is turned off.
– When you turn on the System again.
• While QP Link is activated, QP Link may start
working when you just connect the Digital Audio
Player to the LINE IN jack or unplug it. This is not
a malfunction.
Player to the LINE IN jack or unplug it. This is not
a malfunction.
You can adjust the sound input level from the
Digital Audio Player.
Digital Audio Player.
1
Press .
2
Hold down
until the input level
appears.
• Each time you hold down
, the sound
input level changes as follows:
Listening to a Digital Audio
Player readily (QP Link)
Bubbles appear when the System
detects the sound signal.
detects the sound signal.
: Activates the QP Link (initial
setting).
: Deactivates the QP Link.
QPLink indicator
Adjusting the Sound Input
Level
: Select this when the sound is
too loud with "LEVEL 2"
selected. This setting is
recommended when
connecting an audio device
other than a Digital Audio
Player to the LINE IN jack.
selected. This setting is
recommended when
connecting an audio device
other than a Digital Audio
Player to the LINE IN jack.
: Select this when the sound is
too loud with "LEVEL 3"
selected.
selected.
: Select this when listening to a
Digital Audio Player (initial
setting).
setting).
UX-QX3W_A[A].book Page 18 Friday, July 21, 2006 4:37 PM