JVC FS-SD98V ユーザーズマニュアル
21
English
Using the Timers
The timers let you control listening functions automatically.
Setting the Clock
(Using the Remote Control)
• You can set the clock whether the System is turned on or off.
• When you plug the AC power cord into the wall outlet,
• When you plug the AC power cord into the wall outlet,
the time indication “0:00” blinks on the display.
• The clock must be correctly set for the timers to work.
• The procedure must be completed within
• The procedure must be completed within
two minutes
.
Otherwise, the setting is cleared and must be repeated
from the beginning.
from the beginning.
1
Press the CLOCK/TIMER button on the
Remote Control.
Remote Control.
The hour digit of the time indication rapidly blinks on
the display.
the display.
2
Press the UP or DOWN button to set the
hour.
hour.
Pressing the UP button moves the time forwards and
pressing the DOWN button moves it backwards. Hold
down the button to move the time rapidly.
You can use the > or < button instead of the UP or
DOWN button.
pressing the DOWN button moves it backwards. Hold
down the button to move the time rapidly.
You can use the > or < button instead of the UP or
DOWN button.
3
Press the SET button.
The minute digits of the time indication rapidly blink on
the display.
the display.
4
Press the UP or DOWN button to set the
minute.
minute.
You can use the > or < button instead of the UP or
DOWN button.
DOWN button.
5
Press the SET button.
The selected time is set and the seconds start counting
from 0.
To change the set time, press the CLOCK/TIMER but-
ton three times to display the clock, and then repeat
from step 2.
from 0.
To change the set time, press the CLOCK/TIMER but-
ton three times to display the clock, and then repeat
from step 2.
CAUTION:
• If there is a power failure, the clock loses its
setting after about 20 minutes. “0:00”
blinks on the display and the clock must be
reset.
blinks on the display and the clock must be
reset.
• The clock may gain or lose one to two minutes per month.
Setting the Daily Timer
(Using the Remote Control)
Once you have set the Daily Timer, the timer will be acti-
vated at the same time every day.
The Timer indicator on the display shows that the Daily
Timer you have set is in effect.
If the unit is already turned on at the ON time of the timer,
the timer does not work.
vated at the same time every day.
The Timer indicator on the display shows that the Daily
Timer you have set is in effect.
If the unit is already turned on at the ON time of the timer,
the timer does not work.
• Perform each setting within
30 seconds
. Otherwise, set-
ting will be cleared and the procedure must be repeated
from the beginning.
from the beginning.
SLEEP
REMOTE CONTROL
VOLUME
DIMMER
SLEEP
DISPLAY
DOOR SLIDE
PLAY MODE
REPEAT
CANCEL
AHB PRO
TONE
CONTROL
CLOCK
/ TIMER
HIGHLIGHT
PBC ON / OFF
VCD NUMBER
SELECT
NEXT
PREV
VCD NUMBER
VIDEO INTRO
STILL
UP
SET
DOWN
MD / AUX
FM / AM
CD
FADE MUTING
ON SCREEN
FM MODE
MPX
SLEEP
Timer indicator
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
SLEEP indicator
ON time, OFF time,
Source, Volume
Source, Volume
<
CLOCK/TIMER
UP
>
DOWN
>
DOWN
CLOCK
/ TIMER
SET
DOWN
UP
or
FS-SD58V_A4.fm Page 21 Thursday, September 28, 2000 4:52 PM