JVC GVT0120-001C ユーザーズマニュアル
– 17 –
English
Playing Back Video CDs
Selecting Video Output (PAL, PAL AUTO, NTSC)
You can set this setting in Standby mode.
Before playing a VCD, use the buttons on the unit to select a
video output mode to match your TV system.
Video output is preset for PAL.
Before playing a VCD, use the buttons on the unit to select a
video output mode to match your TV system.
Video output is preset for PAL.
Relationship among the playable CDs, System’s TV
output mode and your TV’s color system:
output mode and your TV’s color system:
1
Turn off the power to put the System into
Standby mode.
Standby mode.
2
Press and hold the
7 button on the Unit for
more than 2 seconds.
The current TV output mode (“NTSC” for example)
appears on the display for five seconds.
appears on the display for five seconds.
3
Within five seconds, press the TUNING
+/
+/
¡ or TUNING 1/– button on the Unit
to select the System’s TV output mode.
Each time you press the button, the TV output mode
changes as follows:
NTSC PAL PAL AUTO (back to beginning)
changes as follows:
NTSC PAL PAL AUTO (back to beginning)
NTSC:
for NTSC exclusive TV
PAL:
for PAL exclusive TV
PAL AUTO: for multisystem TV
4
Press
7 button to confirm selected TV output
mode.
Loading Discs
1
Press CD Open/Close
0.
The unit automatically turns on and the disc tray comes out.
2
Place a disc correctly within the circle of the
disc tray, with its label side up.
disc tray, with its label side up.
• When using a CD single (8 cm), place it within the inner
circle of the disc tray.
3
Press DISC SKIP and place the next CD.
When you press the button, the tray turns for the next CD.
4
Repeat steps 3 for the last CD.
5
Press CD Open/Close
0.
The tray is closed.
When you place a CD onto the currently selected tray,
whose disc number shown on the CD indicator, reading of
the CD starts. After the reading is completed, the total
number of tracks and total playing time will appear, then
the playing time of the first track.
When you place a CD onto the currently selected tray,
whose disc number shown on the CD indicator, reading of
the CD starts. After the reading is completed, the total
number of tracks and total playing time will appear, then
the playing time of the first track.
*VIDEO CD or AUDIO CD
If the video CD has the Playback Control function, “VCD
PBC” will appear when you press
If the video CD has the Playback Control function, “VCD
PBC” will appear when you press
7 followed by PBC and
DISC
3¥8.
To put an 8 cm CD onto a tray, insert it so that it is aligned
with the groove in the trays center.
If a tray is opened when the System switches to the standby
mode, the tray will close automatically.
with the groove in the trays center.
If a tray is opened when the System switches to the standby
mode, the tray will close automatically.
Playing a Video CD
You can play video CDs either with or without the PBC
function.
function.
1
Turn on the TV and select the video input so
that you can view the pictures from the CD
player.
that you can view the pictures from the CD
player.
Refer to the manual supplied for your TV.
2
Prepare a CD.
Refer to “Loading Discs” on this page.
3
Start playback of the CD.
Press DISC
3¥8, to start playback of the currently
selected CD, or press DISC 1-3, to select the disc and
start playing.
start playing.
Compu Play
When DISC
3¥8, or DISC 1-3, is pressed while the system
is on standby, the power is automatically turned on.
To stop during play, press
7.
To stop playing and remove the disc, press
7 and then 0
for the disc being played.
Label side up
1
2
3
Playable CD
Player’s TV output mode
Your TV’s color system
NTSC/PAL
NTSC
NTSC
NTSC/PAL
PAL
PAL
NTSC/PAL
PAL AUTO
Multisystem
SELECT
READING NOW
Total number of tracks
and playing time
Playing time of the
1st track
\
\
*
VIDEO CD
«
CA-MXSK_ENUE13-23.p65
14/10/03, 10:50 AM
17