JVC MX-GT88 取り扱いマニュアル
20
English
Playing Back Tapes
Playing Back a Tape
1
Press
0 EJECT for the deck you want to use.
2
Put a cassette in, with the exposed part of the
tape down and the side you want to play
facing front.
tape down and the side you want to play
facing front.
• You can play back only type I tapes.
3
Close the cassette holder gently.
If you put cassettes in both decks A and B, the last deck
which you have put a cassette into is selected.
To operate the other deck, press TAPE A/B (or A/B on
the remote control).
which you have put a cassette into is selected.
To operate the other deck, press TAPE A/B (or A/B on
the remote control).
4
Press TAPE
3
3
3
3
3.
The tape play starts and the tape running
indicator (
indicator (
3) starts flashing slowly.
When the tape plays to the end, the deck automatically stops.
The use of the C-120 or thinner tape is not
recommended, since characteristic deterioration
may occur and this tape easily jams in the pinch-
rollers and the capstans.
recommended, since characteristic deterioration
may occur and this tape easily jams in the pinch-
rollers and the capstans.
To stop during play, press
7.
To operate the other deck, press TAPE A/B (or A/B on the
remote control), then TAPE
remote control), then TAPE
3.
To fast-forward the tape, press
¡ (or ¢/¡ on the
remote control). The tape running indicator (
3) starts
flashing quickly.
To rewind the tape, press
1 (or 4/1 on the remote
control). The tape running indicator (
2) starts flashing
quickly.
To remove the cassette, press
0 EJECT for deck A or
EJECT
0 for deck B.
For Deck A
For Deck B
EN18_20MXGT88&GA77[C].pm6
03.1.14, 3:58 PM
20