JVC CA-MXDK5 ユーザーズマニュアル

On-Screen Disc Operations

(see pages 21 to 25)

Operations Using the On-screen Bar:

• For DVD-R/-RW in the VR format, “PG” or “PL” appears

instead of “TITLE” on the on-screen bar.

Recording Operations

(see pages 26 and 27)

Recording on a Tape:

• The recording level is automatically set correctly. Thus,

you can adjust the sound you are actually listening to
without affecting the recording level.

• There is leader tape which cannot be recorded onto at the

start and the end of cassette tapes. Thus, when recording
discs or radio broadcasts, wind the leader tape first to
ensure that the recording will be made without any music
part lost.

• If no cassette or a protected tape is inserted, “NO REC”

appears on the display.

• You cannot change the source during recording.

Synchronized Disc Recording:

• While recording, you cannot use

, DVD

LEVEL, 3D PHONIC and source buttons.

• You can adjust volume control, sound setting (Active Bass

Extension and Sound Turbo) and sound mode but the
settings do not affect the recording sound.

• Everything on the disc goes onto the tape in the order on

the disc, or according to the order you have made for
Program Play.

• You cannot use Repeat Play during synchronized

recording (Repeat Play will be canceled).

Enjoying Karaoke

(see pages 28 to 31)

Singing Along (Karaoke)

• CA-MXDK5 only: Key control cannot be activated while

DVD Audio is played.

Singing Along Using Stereo Discs—Vocal Masking:

• Vocal Masking Mode setting is also applied to the optical

digital output signals through the OPTICAL DIGITAL
OUTPUT terminal.

• On some music, Vocal Masking does not provide the

correct effect.

Reserving Karaoke Songs—Karaoke Program Play

• If DVD Audio (CA-MXDK5 only) or DVD-VR is loaded,

you cannot use Karaoke Program Play.

Timer Operations

(see pages 32 and 33)

Setting the Timer:

• If you do not specify the preset station or track number

correctly while setting a timer, the currently selected
station or the first track will be played when the timer is
activated.

• When you unplug the AC power cord or if a power failure

occurs, the timer will be canceled. You need to set the
clock first, then the timer again.

• Without stopping the recording, you cannot change the

source after Recording Timer starts recording.

• If you set DVD Video/MPEG-1/MPEG-2/ASF/DivX as

the source, Daily Timer will not work correctly.

Timer Priority:

• If you set the Sleep Timer after Daily Timer starts playing

the selected source, Daily Timer is canceled.

• If you set the Sleep Timer after Recording Timer starts

recording, Recording Timer is canceled, but recording
continues until Sleep Timer shuts off the power.

Setup Menu Operations

(see pages 34 and 35)

How to set the Initial Settings:

• If the upper and lower parts of the menu are cut off, adjust

the picture size control of the TV.

LANGUAGE menu:

• When the language you have selected for MENU

LANGUAGE, AUDIO LANGUAGE, or SUBTITLE is
not recorded on a disc, the original language is used as the
initial language.

PICTURE menu—MONITOR TYPE:

• Even if “4:3 PS/4:3 MULTI PS” is selected, the screen size

may become 4:3 letter box with some DVD Video discs.
This depends on how the discs are recorded.

• When you select “16:9/16:9 MULTI” for a picture whose

aspect ratio is 4:3, the picture slightly changes due to the
process for converting the picture width.

AUDIO menu—DOWN MIX:

• This setting is not effective when DTS multi-channel

software is played back.

OTHERS menu—ON SCREEN GUIDE:

• The setup menu and on-screen bar will be displayed (and

recorded) even though this function is set to “OFF.”
Subtitles and the information for zoom-in always appear on
the display regardless of this setting.

MX_DK5_3_1.book Page 39 Tuesday, February 7, 2006 11:49 AM