JVC GVT0116-003B ユーザーズマニュアル
7
English
INPUT
INPUT
INPUT
INPUT
RIGHT
LEFT
MAIN SPEAKERS
CAUTION: SPEAKER IMPEDANCE 6 -16
SUBWOOFERS
RIGHT
LEFT
1
If the cords are covered with insulation,
remove a short section of insulation at the
end of each cord by twisting and pulling it
off.
remove a short section of insulation at the
end of each cord by twisting and pulling it
off.
2
Connect the AM loop antenna to the AM
LOOP terminals as illustrated.
LOOP terminals as illustrated.
3
Turn the AM loop antenna until you have
the best reception.
the best reception.
To connect an outdoor AM antenna
When reception is poor, connect a single vinyl-covered wire
to the AM EXT terminal and extend it horizontally. The AM
loop antenna must remain connected.
to the AM EXT terminal and extend it horizontally. The AM
loop antenna must remain connected.
For better reception of both FM and AM
• Make sure the antenna conductors do not touch any other
terminals and connecting cords.
• Keep the antennas away from metallic parts of the unit,
connecting cords, and the AC power cord.
AM antenna
Vinyl-covered wire
(not supplied)
AM loop antenna
(supplied)
Connecting Speakers
Speaker cord
Speaker cord
FM 75
COAXIAL
COAXIAL
AM EXT
AM LOOP
ANTENNA
1
2
3
RIGHT
SPEAKER
IMPEDANCE
6 - 16
LEFT
SPEAKERS
FOR UX-J66V:
Right speaker
Left speaker
FOR UX-J55V:
Right speaker
Left speaker
Speaker
cord
Speaker
cord
1
2
3
Black
Red
Blue
Gray
1
If the cords are covered with insulation,
remove a short section of insulation at the
end of each cord by twisting and pulling it
off.
remove a short section of insulation at the
end of each cord by twisting and pulling it
off.
2
Press and hold the clamp of the speaker
terminal as illustrated.
terminal as illustrated.
3
Insert the end of the speaker cord into the
terminal.
terminal.
Match the polarity between the unit and the speaker
terminals:
terminals:
ª to ª and · to ·.
4
Release your finger from the clamp.
EN01-14_UX-J66&55[US/UN]1.pm6
20/6/03, 3:04 PM
7