JVC CA-FSXA1 ユーザーズマニュアル

 

To reduce the risk of electrical shocks, fire, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose this appliance to rain or moisture.

Disconnect the mains plug to shut the power off completely 
(the STANDBY lamp goes off). When installing the 
apparatus, ensure that the plug is easily accessible.
The

(Standby/on)

button in any position does not 

disconnect the mains line.
• When the system is on standby, the STANDBY lamp 

lights red.

• When the system is turned on, the STANDBY lamp 

goes off.

The power can be remote controlled.

1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no 

user serviceable parts inside the unit; leave all 
servicing to qualified service personnel.

3. CAUTION: Visible and/or invisible class 1M laser 

radiation when open. Do not view directly with 
optical instruments.

4. REPRODUCTION OF LABEL: CAUTION LABEL, 

PLACED INSIDE THE UNIT.

• Do not block the ventilation openings or holes. (If 

the ventilation openings or holes are blocked by a 
newspaper or cloth, etc., the heat may not be able 
to get out.)

• Do not place any naked flame sources, such as 

lighted candles, on the apparatus.

• When discarding batteries, environmental problems 

must be considered and local rules or laws 
governing the disposal of these batteries must be 
followed strictly.

• Do not expose this apparatus to rain, moisture, 

dripping or splashing and that no objects filled with 
liquids, such as vases, shall be placed on the 
apparatus. 

DO NOT cut off the mains plug from this equipment. 
If the plug fitted is not suitable for the power points in 
your home or the cable is too short to reach a power 
point, then obtain an appropriate safety approved 
extension lead or consult your dealer.

BE SURE to replace the fuse only with an identical 
approved type, as originally fitted.

If nonetheless the mains plug is cut off ensure to 
remove the fuse and dispose of the plug 
immediately, to avoid a possible shock hazard by 
inadvertent connection to the mains supply.
If this product is not supplied fitted with a mains plug 
then follow the instructions given below:

DO NOT make any connection to the terminal which 
is marked with the letter E or by the safety earth 
symbol or coloured green or green-and-yellow.
The wires in the mains lead on this product are 
coloured in accordance with the following code:

Blue:

Neutral

Brown:

Live

As these colours may not correspond with the 
coloured markings identifying the terminals in your 
plug proceed as follows:

The wire which is coloured blue must be connected 
to the terminal which is marked with the letter N or 
coloured black.
The wire which is coloured brown must be 
connected to the terminal which is marked with the 
letter L or coloured red.

FS-XA1[B].book  Page 1  Wednesday, March 22, 2006  1:34 PM