JVC GVT0267-009A ユーザーズマニュアル

rep

■ IMPORTANT
• Connect the main unit directly to a TV (or a

monitor) without routing through a video
cassette recorder (VCR) or an HDD/DVD
recorder. Otherwise picture distortion may occur
during playback. (Routing the connection
through a VCR or an HDD/DVD recorder,
however, does not affect the audio quality.)

• Connecting the main unit to a VCR-built-in-TV

may also cause picture distortion during
playback.

This system can output uncompressed digital
video signals to a TV compatible with HDMI (High
Definition Multimedia Interface).

NOTE
• The HDMI video signal type can be checked with

the “HDMI” indicator in the display window.
(Refer to “Selecting the video signal type” on
page 10.)

• If the picture is distorted while an HDMI TV is

connected, turn off the main unit and turn it on
again.

• A TV compatible with HDCP (High-Bandwidth

Digital Content Protection) can also be
connected to the [HDMI MONITOR OUT]
terminal, so that the uncompressed HD video
signal type can be output as well.

• This system is compatible with some basic

functions of HDMI CEC. (Refer to page 57.)

NOTE
• You can output the audio signal from the

[DIGITAL OUT] terminal when “DVD”, “USB” or
“DGTL IN” is selected as the source in the
display window.

• When “DGTL IN” is selected as the source in the

display window, digital audio from the
[DIGITAL OUT] terminal is decoded to a linear
PCM signal.

Main unit

Direct connection

TV (or monitor)

VCR

or HDD/DVD

recorder

Connecting a TV with the [HDMI
MONITOR OUT] terminal

Main unit

(rear view)

To an HDMI input terminal

HDMI cable (not supplied)

Connecting external digital
audio devices

Output

MD player or

satellite receiver

To an optical digital
output terminal

Optical digital cable
(not supplied)

Main unit

(rear view)

Input

Output

Optical digital cable
(not supplied)

To an optical digital
input terminal

Input

AV amplifier with
a built-in decoder

NX-F30[U].book Page 8 Tuesday, April 21, 2009 6:23 PM