JVC CA-UXHB4 ユーザーズマニュアル
18
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/
SCROLL
DOWN
SEARCH/
SCROLL
UP
/
SELECT
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/
SCROLL
DOWN
SEARCH/
SCROLL
UP
/
SELECT
4
Press SEARCH/SCROLL UP
or SEARCH/SCROLL DOWN
to select a station.
or SEARCH/SCROLL DOWN
to select a station.
• Each time you press the button, the station
changes step by step.
5
Press SELECT.
Signal reception indicator and the
current signal strength level appear (filled
blocks across from left to right).
current signal strength level appear (filled
blocks across from left to right).
• If the signal strength level does not reach to the signal
reception indicator, you cannot listen to the station well.
In this case, adjust the position of the antenna.
In this case, adjust the position of the antenna.
6
Press SELECT again.
A station is tuned in.
• For the description of information sent from the station,
see page 20.
Tuning in to a Station
1
Press SEARCH/SCROLL UP
or SEARCH/SCROLL DOWN
to select a station.
or SEARCH/SCROLL DOWN
to select a station.
The list of the station appears.
2
Press SELECT to tune in to the
selected station.
selected station.
• The unit does not tune in to the station
until you press SELECT.
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/
SCROLL
DOWN
SEARCH/
SCROLL
UP
/
SELECT
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/
SCROLL
DOWN
SEARCH/
SCROLL
UP
/
SELECT
On the remote control ONLY:
1
Tune in to the station you want to preset.
2
Press PROGRAM.
An available preset number starts flashing on the
display.
display.
3
Press PRESET GROUP or
PRESET GROUP to select a
preset number, then press
PROGRAM.
PRESET GROUP to select a
preset number, then press
PROGRAM.
The preset station is stored in memory.
4
To preset more stations, repeat steps 1 to 3
above, allocating a different preset number to
each station.
above, allocating a different preset number to
each station.
• Storing a new station on an already assigned number
erases the previously stored one.
When you unplug the AC power cord or if a power
failure occurs
failure occurs
The preset stations will remain in the unit.
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/
SCROLL
DOWN
SEARCH/
SCROLL
UP
/
SELECT
PROGRAM
PROGRAM
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/
SCROLL
DOWN
SEARCH/
SCROLL
UP
/
SELECT
Tuning in to a Preset Station
On the remote control ONLY:
1
Press FM/AM/DAB to select “DAB.”
The unit automatically turns on and tunes in to
the previously received DAB station.
the previously received DAB station.
2
Press PRESET GROUP or
PRESET GROUP repeatedly
to select a preset number.
PRESET GROUP repeatedly
to select a preset number.
To tune in to a preset station directly using the number
buttons
buttons
On the remote control ONLY:
Pressing the number button(s) allows you
to select the preset number you want.
to select the preset number you want.
Ex.: For preset number 5, press 5.
For preset number 10, press +10,
then press 0.
then press 0.
When you press a number with no preset station
“Empty Preset” appears on the display.
FM/AM/DAB
Presetting Stations
You can preset 10 DAB stations manually.
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start again from step 2.
1
2
3
4
5
6
7
8
0
9
+10
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/
SCROLL
DOWN
SEARCH/
SCROLL
UP
/
SELECT
Signal reception indicator
Signal strength level
Channel and frequency
Information sent from the station (Ex. program type)
Station name
Continued
17-24_UX-HB4[B]6.p65
04.8.5, 6:17 PM
18