JVC CA-UXG45 ユーザーズマニュアル

(see pages 9 to 14)

• If you store a new station into an occupied preset number, the 

previously stored station in that number will be erased.

• When you unplug the AC power cord or if a power failure 

occurs, the preset stations will be erased in a few days. If this 
happens, preset the stations again.

• When using an 8 cm disc, place it on the inner circle of the disc 

tray.

• This System cannot play “packet write” discs.
• For MP3 playback...

– MP3 discs are required a longer readout time than regular 

CDs. (It depends on the complexity of the group/file 
configuration.)

– Some MP3 files cannot be played back and will be skipped. 

This result from their recording processes and conditions.

– When making MP3 discs, use ISO 9660 Level 1 or Level 2 

for the disc format.

– This System can play back MP3 files with the extension 

code <.mp3> (regardless of the letter case—upper/lower).

– Some characters or symbols will not be shown correctly on 

the display.
The maximum character number shown on the display is 32 
(without the extension code) for files, and 30 for ID3 tag.

– It is recommended that you make each MP3 file at a 

sampling rate of 44.1 kHz and at bit rate of 128 kbps.

– This System can recognize a total of 500 tracks and 200 

groups on an MP3 disc and 999 tracks and 250 groups on a 
USB Memory. Those exceeding the maximum number 
cannot be recognized.

– Playback order of MP3 tracks may be different from the one 

you have intended while recording. If a folder does not 
include MP3 tracks, they are ignored.

Playing Back a Tape:
• It is not recommended to use the C-120 or longer tapes. 

These tapes easily jams in the pinch roller and capstan, and 
may cause characteristic deterioration.

Quick Portable Link (QP Link):
• The system holds the On/Off status of QP Link even when 

the AC Power cord  is connected or removed.

• The source remains at AUX when you stop the other 

equipment such as a digital audio player.

(see pages 15 to 17)
Adjusting the Volume:

• Be sure to turn down the volume before connecting or putting 

the headphones.

• This function also affects the sound through the headphones.
• SOUND TURBO and AHB PRO cannot be used at the same 

time.

•  “0:00” will flash on the display until you set the clock.
• The clock may gain or lose 1 to 2 minutes per month. If this 

happens, reset the clock.

• Auto Standby cannot be canceled by the following operations.

– Changing the display brightness.
– Adjusting the volume.
– Adjusting the sound.

(see pages 18 to 20)
Programming the Playing Order—Program Play:

• If you try to program a 33rd track, “FULL” appears on the 

display.

• While programming steps...

Your entry will be ignored if you have tried to program an item 
number that does not exist on the disc (for example, selecting 
track 14 on a disc that only has 12 tracks).

(see pages 21 to 22)

• The recording level is automatically set correctly. Thus, you 

can adjust the sound you are actually listening to without 
affecting the recording level.

• There is leader tape which cannot be recorded onto at the start 

and end of cassette tapes. Thus, when recording CDs or radio 
broadcasts, wind the leader tape first to ensure that the 
recording will be made without any music part lost.

• If you start recording with no cassette inserted, “NO TAPE” 

appears on the display. If a protected tape has been inserted, 
“NO REC” appears.

• You cannot open the disc tray while recording.

1

1

2

3

10

11

12

4

5

6

7

8

9

MP3 groups/tracks configuration
This System plays back MP3 tracks as follows.
The play order in the figure is for MP3 tracks on the disc.
MP3 tracks on USB Memory or DAP may be played 
back differently.

Group with its play order

MP3 track with its play order

UX-G45[US].BOOK  Page 26  Thursday, June 15, 2006  4:16 PM