JVC CA-MXJ30 ユーザーズマニュアル
– 8 –
English
When connecting the AC power cord into a wall outlet, the
unit automatically starts display demonstration.
unit automatically starts display demonstration.
To stop the display demonstration, press any button on the
unit or the remote control.
unit or the remote control.
To start the display demonstration manually
Press and hold DEMO for more than 2
seconds.
seconds.
To stop the demonstration, press any button.
CANCEL
DEMO
Connecting Other Equipment
You can connect an audio equipment — used only as a
playback device.
When you connect and use this equipment, refer also to its
manual.
playback device.
When you connect and use this equipment, refer also to its
manual.
Be sure that the plugs of the audio cords are color coded:
White plugs and jacks are for left audio signals, and red ones
for right audio signals.
White plugs and jacks are for left audio signals, and red ones
for right audio signals.
• DO NOT connect any equipment while the power
is on.
• DO NOT plug in any equipment until all
connections are complete.
NOW, you can plug in the unit and other
connected equipment FINALLY!
connected equipment FINALLY!
ANTENNA
AUX
GND
AM EXT
RIGHT
LEFT
FM
COAXIAL
COAXIAL
AM LOOP
75
SPEAKERS
RIGHT
LEFT
To connect audio equipment
Connect the audio output jacks on the other equipment and
the AUX jacks on the rear, using an audio cord (not supplied).
the AUX jacks on the rear, using an audio cord (not supplied).
To audio output
Audio equipment
To a wall outlet
AUX
RIGHT
LEFT
SPEAKERS
RIGHT
LEFT
ANTENNA
GND
AM EXT
FM
COAXIAL
COAXIAL
AM LOOP
75
EN01-13.CA-MXJ30/330/35R[E]/f
99.2.19, 4:55 PM
8