JVC RX-6032VSL ユーザーズマニュアル
35
Operating Other Manufacturers’ Video Equipment
By changing the transmission signals, you can use the remote
control supplied for this unit to operate other manufacturers’
equipment.
control supplied for this unit to operate other manufacturers’
equipment.
• Refer also to the manuals supplied for the other products.
• To operate these components with the remote control, first
• To operate these components with the remote control, first
you need to set the manufacturers’ code each for TV, CATV
converter, VCR and DVD player.
converter, VCR and DVD player.
• When replacing the batteries in the remote control, set the
manufacturers’ codes again.
To change the transmission signals for
operating a TV
operating a TV
1
Set TV/CATV selector to “TV.”
2
Press and hold STANDBY/ON
TV/CATV.
3
Press TV SOUND.
4
Enter manufacturer’s codes using buttons
1 – 9, and 0.
1 – 9, and 0.
5
Release STANDBY/ON
TV/CATV.
Now, you can perform the following operations on the TV.
STANDBY/ON
TV/CATV
Turn on or off the TV.
TV/VIDEO
Set the input mode (either TV or
VIDEO).
VIDEO).
TV VOLUME +/–
Adjust the volume.
TV/CATV CH +/–
Change the channels.
After pressing TV SOUND, you can perform the following
operations on the TV:
operations on the TV:
1 – 9, 0, +10 (100+)
Select a channel.
ENTER (10)
Function as the ENTER button.
Note:
Refer also to the manual supplied with your TV.
6
Try to operate your TV by pressing
STANDBY/ON
STANDBY/ON
TV/CATV.
When your TV turns on or off, you have entered the correct
codes.
codes.
If more than one code is listed for your brand of TV, try
each one until the correct one is entered.
each one until the correct one is entered.
Manufacturers’ codes for TV
Manufacturer
Codes
JVC
01*
Hitachi
10
Magnavox
02
Mitsubishi
03
Panasonic
04, 11
RCA
05
Samsung
12
Sanyo
13
Sharp
06
Sony
07
Toshiba
08
Zenith
09
*
“01” is the initial setting.
Operating JVC’
s Audio/Video Components/Operating Other Manufactur
ers’ Video Equipment
To change the transmission signals for
operating a CATV converter
operating a CATV converter
1
Set TV/CATV selector to “CATV.”
2
Press and hold STANDBY/ON
TV/CATV.
3
Press TV SOUND.
4
Enter manufacturer’s codes using buttons
1 – 9, and 0.
1 – 9, and 0.
5
Release STANDBY/ON
TV/CATV.
Now, you can perform the following operations on the
CATV converter.
CATV converter.
STANDBY/ON
TV/CATV
Turn on or off the CATV converter.
TV/CATV CH +/–
Change the channels.
After pressing TV SOUND, you can perform the following
operations on the CATV converter:
operations on the CATV converter:
1 – 9, 0, +10 (100+)
Select the channels.
ENTER (10)
Function as the ENTER button.
Note:
Refer also to the manual supplied with your CATV converter.
6
Try to operate your CATV converter by
pressing STANDBY/ON
pressing STANDBY/ON
TV/CATV.
When your CATV converter turns on or off, you have
entered the correct codes.
entered the correct codes.
If more than one code is listed for your brand of CATV
converter, try each one until the correct one is entered.
converter, try each one until the correct one is entered.
Manufacturers’ codes for CATV converter
Manufacturer
Codes
Echostar
01*
General Instrument
02, 03, 04, 05,
06, 07, 08, 09
06, 07, 08, 09
Hamlin
16, 17, 18, 19
Pioneer
14, 15
RCA
20
Scient
10, 11
Sony
21
Zenith
12, 13
*
“01” is the initial setting.
Manufacturers’ codes are subject to change
without notice. If they are changed, this remote
control cannot operate the equipment.
without notice. If they are changed, this remote
control cannot operate the equipment.
28-39_RX-60_5030[J]f
02.11.28, 13:48
35