JVC NX-DV3 ユーザーズマニュアル

ページ / 82
Introduction
31
(Continued)
Convenient Functions of the DVD Player 
Example:
5
Press   
to 
change 
the 
value.
6
Press .
• To adjust other items, go back to step 3.
7
Press .
NOTE
• If no operation is made for several seconds during 
the procedure, the settings made so far will be 
automatically stored.
• "VFP" stands for "video fine processor".
In the progressive mode, you can enjoy better 
pictures. 
CAUTION
• In order to enjoy pictures in the progressive mode, 
the following requirements should be met.
• There must be component video input termi-
nals on the TV set connected to the main unit.
• The main unit and the TV set must be con-
nected using a component video cord 
(
page 17).
When the above requirements are not satisfied, 
leave the main unit in the Interlace mode. If the 
progressive mode is set, pictures may be 
distorted.
■While the disc is stopped 
1
Hold down 
 for two or more 
seconds.
2
Press  
or  
to 
select 
"PROGRESSIVE" or 
"INTERLACE".
3
Press 
• It returns to sound source display.
• When the progressive mode is selected, the 
display window shows "PROGRESSIVE".
There are some DVD AUDIO discs with a special 
group, called "bonus group", recorded. 
• This operation can be carried out when 
"BONUS" is lit in the display window on 
the main unit.
■While a disc is being played back
1
Set the remote control mode 
selector to AUDIO.
2
Press 
 repeatedly during 
playback to select a bonus group.
• "KEY_ _ _ _" appears on the TV screen 
and in the display window on the main 
unit.
3
Press the number buttons to enter 
a pin code (4 digits).
• The method of getting a pin code is 
different depending on the disc.
4
Press .
• When a correct pin code is entered, 
"BONUS" disappears and the playback 
of the bonus group starts.
• If an incorrect pin code is entered, try 
entering a correct pin code again.
Enjoying Better Pictures 
(SCAN MODE)
Playing Back the Bonus 
Group
NX-DV3[UJ].book  31 ページ  2004年12月28日 火曜日 午後2時37分