JVC RX-6040B ユーザーズマニュアル
35
English
Operating Other Manufacturers’ Video Equipment
This remote control supplied for the receiver can transmit control signals for other manufacturers’ TVs, CATV
converters, VCRs and DVD players.
converters, VCRs and DVD players.
When operating the other manufacturers’ components, refer also to
the manuals supplied with them.
• After replacing batteries for the remote control, you need to set the
the manuals supplied with them.
• After replacing batteries for the remote control, you need to set the
manufactures’ codes again.
To change the transmittable signals for
operating another manufacturer’s TV
operating another manufacturer’s TV
1 Set the TV/CATV selector to “TV.”
2 Press and hold STANDBY/ON
TV/CATV.
3 Press TV SOUND.
4 Enter a manufacturer’s code using buttons 1 – 9,
and 0.
Manufacturer
Codes
JVC
01*
Hitachi
10
Magnavox
02
Mitsubishi
03
Panasonic
04, 11
RCA
05
Samsung
12
Sanyo
13
Sharp
06
Sony
07
Toshiba
08
Zenith
09
* “01” is the initial setting.
5 Release STANDBY/ON
TV/CATV.
Now you can perform the following operations on the TV:
STANDBY/ON
TV/CATV: Turn on and off the TV.
TV/CATV CH +/–: Change the channels.
TV VOLUME +/–: Adjust the volume.
TV/VIDEO:
TV VOLUME +/–: Adjust the volume.
TV/VIDEO:
Set the input mode (either TV or VIDEO).
After pressing TV SOUND, you can perform the following
operations on the TV:
operations on the TV:
1 – 9, 0, 100+ (+10):
Select the channels.
The 10 (ENTER) button will function as the
ENTER button if your TV requires pressing
ENTER after selecting a channel number.
The 10 (ENTER) button will function as the
ENTER button if your TV requires pressing
ENTER after selecting a channel number.
Notes:
• All the functions listed above may not be assigned to the
buttons for some TVs.
• If you cannot change the channels of some TVs by pressing
the 10 keys, press TV/CATV CH +/– for changing the channels.
6 Try to operate your TV by pressing
STANDBY/ON
TV/CATV.
When your TV turns on or off, you have entered the correct
code.
code.
If there are more than one code listed for your brand of TV,
try each one until the correct one is entered.
try each one until the correct one is entered.
To change the transmittable signals for
operating a CATV converter
operating a CATV converter
1 Set the TV/CATV selector to “CATV.”
2 Press and hold STANDBY/ON
TV/CATV.
3 Press TV SOUND.
4 Enter a manufacturer’s code using buttons 1 – 9,
and 0.
Manufacturer
Codes
Echostar
01*
General Instrument
02, 03, 04, 05, 06, 07, 08, 09
Hamlin
16, 17, 18, 19
Pioneer
14, 15
RCA
20
Scient
10, 11
Sony
21
Zenith
12, 13
* “01” is the initial setting.
5 Release STANDBY/ON
TV/CATV.
Now you can perform the following operations on the CATV
converter:
converter:
STANDBY/ON
TV/CATV:
Turn on and off the CATV converter.
TV/CATV CH +/–:
Change the channels.
After pressing TV SOUND, you can perform the following
operations on the CATV converter:
operations on the CATV converter:
1 – 9, 0, 100+ (+10):
Select the channels.
The 10 (ENTER) button will function as the
ENTER button if your CATV converter
requires pressing ENTER after selecting a
channel number.
The 10 (ENTER) button will function as the
ENTER button if your CATV converter
requires pressing ENTER after selecting a
channel number.
6 Try to operate your CATV converter by pressing
STANDBY/ON
TV/CATV.
When your CATV converter on or off, you have entered the
correct code.
correct code.
If there are more than one code listed for your brand of
CATV converter, try each one until the correct one is entered.
CATV converter, try each one until the correct one is entered.
Manufacturers’ codes are subject to change without notice.
If they are changed, this remote control cannot operate the
equipment.
If they are changed, this remote control cannot operate the
equipment.
31-39_5040&6040[C]f.p65
1/13/04, 7:29 PM
35