JVC RX-6500VBK ユーザーズマニュアル
31
English
Manufacturer
Code
Manufacturer
Code
Hitachi
10
Samsung
12
JVC
01
Sanyo
13
Magnavox
02
Sony
07
Mitsumishi
03
Sharp
06
Panasonic
04, 11
Toshiba
08
RCA
05
Zenith
09
This remote control supplied with the receiver can transmit control
signals for other manufacturers’ VCRs, TVs, CATV converters and
satellite tuners. By changing the transmittable signals from preset
ones to the other manufacturers’, you can operate the other
manufacturer’s components using this remote control.
signals for other manufacturers’ VCRs, TVs, CATV converters and
satellite tuners. By changing the transmittable signals from preset
ones to the other manufacturers’, you can operate the other
manufacturer’s components using this remote control.
When operating the other manufacturers’ components, refer also to
the manuals supplied with them. To operate these components with
the remote control, first you need to set the manufacturer’s code
each for VCR, TV, CATV converters, and satellite tuner.
the manuals supplied with them. To operate these components with
the remote control, first you need to set the manufacturer’s code
each for VCR, TV, CATV converters, and satellite tuner.
To change the transmittable signals for
operating another manufacturer’s TV
operating another manufacturer’s TV
1. Press and hold TV POWER.
2. Press TV SOUND/DBS.
3. Enter manufacturer’s code (two digits) using
buttons 1–9, and 0.
See the list below to find the code.
Examples: For a JVC product, press 0, then 1.
For a TOSHIBA product, press 1, then 2.
4. Release TV POWER.
The following buttons can be used for operating the TV:
TV POWER:
Turns on and off the TV.
TV VOL. +/–:
Adjusts the volume.
TV/VIDEO:
Sets the input mode (either TV
or VIDEO).
or VIDEO).
After pressing TV SOUND/DBS, you can perform the
following operations on the TV:
following operations on the TV:
TV CH +/–:
Changes the channels.
1 – 9, 0, 100+ (+10):
Selects the TV channels.
100+ (+10) button will function as
the ENTER button if your TV requires
pressing ENTER after selecting a
channel number.
100+ (+10) button will function as
the ENTER button if your TV requires
pressing ENTER after selecting a
channel number.
RETURN:
Alternates between the previously
selected channel and the current channel.
selected channel and the current channel.
Note:
Refer to the manual supplied with your TV.
5. Try to operate your TV by pressing TV POWER.
When your TV turns on or off, you have entered the correct
code.
If there are more than one code listed for your brand of TV,
try each one until the correct one is entered.
code.
If there are more than one code listed for your brand of TV,
try each one until the correct one is entered.
Manufacturers’ codes are subject to change without notice.
If they are changed, this remote control cannot operate the
equipment.
If they are changed, this remote control cannot operate the
equipment.
Operating Other Manufacturers’ Video Equipment
CATV CH
VCR CH
RM-SRX6500J REMOTE CONTROL
POWER
TV SOUND/ DBS
TV
SURROUND
SURROUND
MODE
CD - DISC
SOUND
VCR
VCR
AUDIO
CATV
CONTROL
CD
PHONO
SLEEP
CATV/ SAT
DVD
TAPE/MD
FM/AM
ANALOG/DIGITAL
TEST
100+
EFFECT
TV/ VIDEO
MUTING
REC PAUSE
1
2
3
4
5
6
7
/P
8
9
0
10
+10
CNTR
REAR•L
REAR•R
SUBWOOFER
MENU
TV CH
TV VOL
VOLUME
ENTER
8
7
3
RETURN
EN27_35.RX-6500V[J]
99.12.14, 4:11 PM
31