JVC CA-NXF7 ユーザーズマニュアル

• The “REC” indicator starts flashing in the 

display window. 

• When recording finishes, the “REC” indica-

tor turns off.

NOTE
• When you want to quit recording, press 7. 

When you press 7 after [ENTER] is pressed in 
step 6, sound having been recorded before 7 is 
pressed is stored. After pressing 7, if you want 
to disconnect the USB device, wait until the 
“REC” indicator stops flashing and disappears. 

• Do not operate the main unit when “PLEASE 

WAIT...” is displayed on the TV screen or “WAIT” 
is displayed in the display window. Wait until the 
display disappears. 

• If “NO USB” appears in the display window, 

check the USB device or its connection. 

• “CANT REC” appears in the display window if 

recording cannot continue for some reason.
- The USB device may be connected improp-

erly. Check the connection.

- You may be trying to record write protected 

tracks.

- You may be trying to record sound from a CD-

R or CD-RW. The Serial Copy Management 
System (SCMS) protects copyright and allows 
only first-generation digital copies from the 
digitally recordable source. In short, you can-
not make “a copy of a copy”.

- You may be trying to record more than the lim-

ited number of recordable tracks. You can 
record up to 999 tracks to a group and 4 000 
tracks to a USB device.

- The number of tracks that can be recorded to 

the root group may be limited on the USB 
device. The number of tracks may have 
exceeded the limitation. In this case, select 
another group or create a new group.

• Changes to the volume and quality of the sound 

during recording do not affect the recorded 
sound or the recorded sound level. 

• The following functions do not affect the 

recorded sound: the treble/bass adjustment 
function (page 13), K2 function (page 14 [only for 
NX-F7]), speaker volume level function (page 
14), surround mode function (page 14), head-
phone surround function (page 15) and clear 
voice function (page 15). 

• When “RANDOM” is selected, operating this 

function automatically cancels random playback.

• Do not bump or move the main unit while record-

ing sound. Such movement may interfere with 
recording. 

• Do not disconnect the USB device during 

recording, as this may cause malfunction. 

• You can use the number buttons, 4 or ¢no to 

select a track. 

• Finishing step 6 returns playback to the begin-

ning of the current track and only that track is 
recorded. 

NOTE
• You can also record only the desired track by 

pausing the track instead of step 3 on page 52. 

• When “RANDOM” is selected, operating this 

function automatically cancels random playback.

• Refer to steps 1 and 2 on pages 31 and 32 for 

programming tracks. 

• The following procedure is the same as steps 4 

to 6 on page 52 and this page.

Recording only one track 

Recording programmed tracks

Ripping sound directly from a CD to a USB device (continued)

NX-F3_NX-F7[US]-09.fm  Page 53  Wednesday, March 19, 2008  2:24 PM