JVC DD-1 ユーザーズマニュアル

If no sound is produced for 3 minutes, the main 
unit automatically turns off. 
This function is available when a disc/file is 
selected as the source. 
You cannot use this function when a radio broad-
cast or a device connected to the [LINE IN 1], 
[LINE IN 2] or [LINE-DIGITAL IN] terminals is 
selected as the source. 

■When a disc/file is selected as the source

. 

• Pressing [A.STANDBY] once again deactivates 

the function. (The display window changes to 
“A.STANDBY OFF”.)

When playback of a disc/file finishes, the auto 
standby function starts a countdown. 

When no operation is carried out for 3 minutes, the 
main unit automatically turns off. 

NOTE
• Leaving the volume at “0” is not the same as 

producing no sound, and therefore does not start 
the auto standby function. 

You can lock the disc tray to prevent the disc from 
being ejected. 

■When the main unit is turned off 

Press 0 while holding down 

7

• Repeat this step to cancel the disc ejection lock. 

(The display window changes to “UNLOCKED”.)

Activating the auto standby function

“A. STANDBY” indicator

Performance of the auto standby 
function

At this time, the “A.STANDBY” indicator 
starts flashing. 

20 seconds before the main unit turns off, 
“A.STANDBY” starts flashing. 

Setting the disc ejection lock

For the locations of the remote 
control buttons, refer to page 17.

DD-831[A_Ux].book  Page 20  Wednesday, August 30, 2006  11:48 AM